Picked this up Friday. Sat near, but not in, the Chesapeake bay since 84 when last registerd. Supposedly a 53,000 original mile car, and I did see evidence that it may be. Oh and it has a Miles connection ?
Attached image(s)
Hard to tell here but the trunk has rusted completely loos from the latch and the rear bumper looks like it was shot with a 12 gauge it has so many rust holes
Attached image(s)
A little fibreglass reinforced filler and it's good to go
Attached image(s)
This is what the rear trunk looked like. Front bumper also had several holes rusted through it.
Attached image(s)
Looks like I found the perfect car to model a new RC shell after!
Think the RC shell will sell?
1.8, side shifter, and I swear to everything holy this freaking engine turns over by hand like it was just rebuilt!!
Attached image(s)
Now for a few of the goodies. Sail trim is near PERFECT! one small dent on the drivers side. These should polish up VERY nicely
Attached image(s)
Side view
Attached image(s)
Why do you want this car? For the motor?
No seats, pass door panel is in decent shape. Windows reg's will be going in my dads 72 so his glass will quit popping out that is assuming I ever get back to werking on it Seat mounts and gauges were removed by a friend who originally found the car 4 years ago. Doors are rusted through on the botoms and the sides
Attached image(s)
QUOTE (porschecb @ Apr 9 2006, 02:26 PM) |
Why do you want this car? For the motor? |
I have thrown away 2-3 sets of fog lights form better cars because the housing had rusted through, so magine my surprise when I found this!
Attached image(s)
JB Weld anyone?
Attached image(s)
Scotty B----------you may have a winner there.
John
Pedal cluster moves as freely as the engine and still had some of the cad plating left on it! Very good piece to rebuild. Note the hole rusted through the wall behind it though
Attached image(s)
Can you post good photos of the engein bay labels please?
QUOTE |
porschecb Posted on Apr 9 2006, 02:26 PM -------------------------------------------------------------------------------- Why do you want this car? For the motor? |
QUOTE (Jeff Bowlsby @ Apr 9 2006, 02:38 PM) |
Can you post good photos of the engein bay labels please? |
GO TO HELL SCOTT !!
Um O.K.
Attached image(s)
Another glimpse into hell
Attached image(s)
Last shot of hell, this time I threw some light on it
Attached image(s)
Just for you Jeff. Is this what you wanted? Hope so 'cause thats all
Attached image(s)
Now what you've all been waiting for. No 6 degrees of seperation here, it's a direct link to Miles
Attached image(s)
At least the door handles are in good shape!
Hey thats a keeper!
Rust free east coast car.
Bet we can rebuild it...
Hope someone paid you to remove that car!
Reminds me of the thread of worst condition teeners from a few years back.
Can't find it with the search function, anyone remember that?
John
If the front and rear are still attached your not even close to being the rustiest.
I scoff at your feeble rustiest attempt.
Wow! Now that's rust! I don't feel too bad now about my first teener that broke in half on the way home. However, in contrast to yours, all the body panels were nearly rust free. You sure you didn't find that thing IN Chesapeake Bay?
Tom
Makes mine appear rust free....
Looks like a winner to me ! ...
Theres so much rust it's starting to loose it's 914 shape.
There are lots of good parts on that thing.
Mark Henry beat me to it....but I can beat that...
I have often thought of taking a car like that, putting in a cage to hold it together, and running it in a few autox's just to piss off the purests...
Rich
That's some serious rust...
Rich... is that where you got those caliper cores you sent me?
Hatteras - That explains everything. First off, I know of no natural food store in Hatteras so, that had to be a while ago. Nothing like good ole sea salt infested air to help the "cause" along.
There's an older surfer guy that hangs out in Hatteras (long blond haired dude, seen him a lot around Teach's Lair) that has a 914. Didn't see him or the car last time I was there. That's not the car though...
Hang on to those outside door handles
I don't think I can fix those but... I'm-a-gonna try. I plan on turning some lemons into lemonade.
Those will be a good video candidate.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)