My engine dropped a valve seat. Not cool.
But Garold has donated his 1.7 to me so I can run it, while he disassembles my 1.7 to learn more about it
So the plan is to get the old engine out on sunday and get the new engine from Indiana somewhere, and bring it home and install it on monday and tuesday.
I'm also planning to build a hot cammed 1.7, with Megasquirt and a raby DTM. Yeah yeah i know the 1.7 sucks and whatever, but all i need it for is to drive around town, and cruise 75-80mph. The DTM should keep the heads cooler and in the longrun i plan to build a 2270 (later down the road) and having a working megasquirt system should help things out quite a bit.
b
ask your "boss at the shop you sort of work at" to take one of the type 1s off the lift so you can roll the 914 in for the transplant britt.
k
i'll see what I can do. Sure would make the transplant easier, but then again one has to wonder just how much easier it could be to drop engine, seperate PP and clutch and put them back together and put engine back in?
b
If I was about 1500 miles closer I would give you a hand. I am sure you when the chips are down they will come running! good luck!
I am going to order viton pushrod tube seals and the intake gaskets. anything else ya'll think I'll need?
I have oil cooler seals, i'll do that while the engine is out
b
now I can see why the Capn gets so Crusty.
nobody reads the posts.
I'M ALSO GOING TO BUILD, meaning at a later date and VERY slowly.
You're right I dont have the $$ now, but with two jobs and a good paychecks, i'll have it soon.
b
"I AM GOING TO BUILD" means something different in california........ I guess.......
So in the same paragraph, you said " i plan to build a 2270 (later down the road)". So you're going to build a 1.7 later on down the road with a DTM then in the long future you'll build a 2270? Wont you want a six by then?
nope.
staying four on the 914.
here's the order:
1776 engine from Garold
1776 build I mentioned before
2270 way WAY later down the road.
b
The DTM and such are things I would need anyway and can be simply transferred to teh new engine.
I already have 2 MS systems, so I'm covered there.
b
I'd be happy to help. But I'm only going to be around tomorrow and saturday. Sunday I'm headed back to Cleveland then PR. Where in KY are you again? Two jacks, two dudes, two hours. and that motor should be powering a funiture dolly
Where are you located? I ask because I think I remember reading you're in Owensboro or Burbon KY, which is like 3 hours from me.
Cool, that's not a bad drive. Tomorrow, earlier is better for me, but when ever you know what works for you just give me a call. I'll pm you my number.
she's coming in at 1pm. I'll see if I have any extra time, doesn't look good though.
good news is that i'm seeing my gf tomorrow.
b
Told ya you didn't break the crank
Britt,
I might be able to help Sunday.( If the wife lets me!) Do you have a truck to pick up the motor?
Let me know what you need. I think I have a set of CV gaskets. Ill check tonight.
David
who said i didnt
b
Checked on the gaskets. Wrong size must be for a 911. I can help Sunday. Let me know.
David
Britt, I would love to help you out but I have to work all weekend.
Britt,
Is it a go for Sunday? Let me know when and where. Any tools you need?
David
Britt:
I may be able to help Sunday in the a.m., depending upon family commitments. Should know something concrete by tomorrow.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)