Does anyone know the wiring sequence for the plug that goes into the fresh air fan? There is a red/wht, wht/gn, wht/yel, and a wht wire. The plug is numbered 1,2,3,4. Any help would be greatly appreciated.
Attached image(s)
I went a pulled the tarp off of the '75 and got:
1 = Green
2 = Black
3 = Brown
4 = "Nada"
Hope that helps!
-Kevin
Thanks Kevin, but I don't have any wires that color on the 1973 fresh air fan.
Crap! Let me check the '74 out in the driveway.....back in 5 min.
You Missouri guys!
Kevin,
That's the wiring for the fuel level sender.
From my 74, I have this:
1. red with white stripe
2. white with green stripe [or yellow stripe per the Haynes manual]
3. white
4. white
Dennis, how does that bra fit??
Sorry, I can't see the plug to get the wire colors off of it.
I know I've got one (several actually) out in the barn, but it'll be tomorrow before I can get to it......we gotta meet some friends in about 15, and the wife's getting antsy.
-Kevin
Excellent!! Gary saved the day (and me alot of rumaging)......fuel sender ...uh...yeah, I knew that.
Hey thanks guys--I didn't know the back of the plug was going to come off and all the wires fall out. zonedoubt, thats the colors I have. I had wired it that way and fan would not work. I will try another bimetalic switch because I know the fan is good.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)