Well, I've finally went through most of the boxes that came with the '74 2.0l I bought in February. Anyway, the stash came with a complete set of seals from Tweeks. Here's the wide view....
Here's a close up.
Another close up. You'll notice in the center is an original interior windshield seal.
Another close up.
Here's some of the hardware. You'll notice in the lower right corner the original black pop-rivets for the threshold plates.
Here's some more parts. You'll notice in the lower right corner the window guide end pieces.
Finally, here's the lower chrome strips that go on the bottom of the sail panel vinyl.
Also, I found a ski rack. Does anyone have a pic on how this is mounted to the car? Also, are there other parts needed to mount it?
Here's another shot...
Wow... thats like 1500 to 2k worth of parts there! depending on when you bought it!
Finally a couple of questions regarding installation....
1. How does the spring on the driver's side arm rest attach?
2. These are the rubber seals for the targa top, one is longer than the other. Do I need to trim to fit?
3. Does anyone have (6) of the allen-head bolts that the arms rests are attached with? Also, does anyone have (1) of the 'square' bolt inserts that go into the door where these bolts attach to?
4. Does anyone have (6) of the little black plastic caps that cover the screws in the roll bar pad?
5. Does anyone have an extra hinge for the center arm rest?
You ski alot in Florida?
Yea, that's what I thought when I got the car... SCORE...
Nope, I don't water or snow ski, but the car was moved from Michigan...
BTW, if anyone is interested in the ski rack send me a PM, it's definately not going on a FL car....
The spring attaches through the door panel. There should be a small hole in the panel and the end of the spring will go through it and hook onto the door.
Thanks Robby, I'll check the door more carefully...
heres a ski rack
Attached image(s)
So the rack that I have, do I need to take it apart and install the ends separately?
It apears as if your rack loads the ski's vertically... as aposed to horizontally like the one pictured....
Take off your bumper and test fit it! (lay down lots of painters tape to protect your paint...)
I think the ski rack inserts in one of the rectangular plugs at the top of the windshield frame and fastens to the 3 holes in the underside-rear of the top.
Nice Score of parts BTW!
All the parts listed in 3. 4. and 5. parts requests i will gladly rip off of my car to trade for some of those new seals!! I'm sooooo jelous, but also inspired that this kind of treasure trove might be waiting at the next "parts car" for sale.
From the looks of all your other concourse quality 914s, I'm guessing a trip to the hardware store is not an option for that interior hardware, but I've been able to take care of most of the bits you've asked about combing through the SS and specialized hardware bins.
You scored
So, you're teasing us with all these parts pictures? I'll give you $50 for the windshield seal.
Despite your CW score, the car looks great too! gl with it.
Actually the car pictured is the one I've been restoring for the last 3 years.
Here's a pic of the car that I purchased that had the parts stash...
My objective is to get this car restored and driveable again...
Rob,
Did you do this just to piss people off?
Don't tell them what you paid for the car AND the parts......
Yea, let's keep that to ourselves.... I'm still planning to get the car back together, then offering it for sale.... I just want to get as many cars back on the road as I can....
Two words come to mind...
you suck!
Sorry about my picture. Thats not the same type.
The curves part polts in under that targa bar and the other part goes into the seal (sorta) that the targa goes into in the front IIRC.
no...share what you paid for the package! i love to see a smoking deal, and know what the price of admission was. it's not like it's "yellow cake".
k
Nice score, windshield frame seal in the bag, sweet.
OK, I never got an answer regarding whether I need to trim the targa top side seal to fit or not?
Hey Kev, I got the car and all of the parts for .........
Ready............
$1000.00
You double suck!
Nice score!
I recently found a local guy with some stash. I got a box full of seals for $100.00. It had everything except the fender to cowl seals, and the fuzzy strips for the doors. Over $1300.00 worth of seals. Factory seals with the stickers still on them! I also got brand new bumper tops from him for $100.00 each, and a new dashtop for $200.00. I finally talked him out of the whole starage shed worth, and with the Cap'n & hwgunner, we bought the whole thing. hwgunner will be putting it up in the classifieds & on Ebay in a day or two. Some nice bumpertops, a really decent dashtop. A set of 4 bolt Fuchs, and a bunch of misc. stuff. Keep your eyes open. Sometimes ya just get lucky!
Mark, sounds like you made a very good score also....
-- Rob
Rob,
Nice score! If you still need those screws and square nuts for the door panel, give me a call. I dont have door panels anymore due to my cage.
John
Nice score Jason, when did you get the car? Is it bahia red?
-- Rob
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)