Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Sawzall party in Denver area Saturday!
Posted by: Gint Apr 29 2006, 06:50 AM
One at Rex's house and the second at Danny's house 8 minutes away from Rex's. Call my cell if you're a straggler that wants to attend and are just hearing about it now. We start at 9:14 of course.
720-480-2540
Posted by: Gint Apr 29 2006, 08:25 AM
I'm on my way...
Posted by: messix Apr 29 2006, 10:10 AM
hey are there any e-brake cables and lever still on the car? effetu needs them if'n yer gonna just trash em. i'm sure he'll pay shipping.
Posted by: spare time toys Apr 29 2006, 10:15 AM
How far are you from the Coors brewery? Just wondering, I have family that lives about 10 minutes from there in Golden.
Posted by: BMartin914 Apr 29 2006, 04:45 PM
Opposite side of the city. Aurora (Centennial).
I couldn't make it today...
Posted by: Gint Apr 29 2006, 06:09 PM
hey are there any e-brake cables and lever still on the car? effetu needs them if'n yer gonna just trash em. i'm sure he'll pay shipping.
Chris is still on our Colorado email list. He knows how to contact Rex if he wants the cables.
Chris also knows that Rex doesn't throw any 914 part away. LOL. I asked Rex if he was going to keep those cables from the first tub because I wanted them for the /6 tub (for rollingaround purposes only). He said of course he was going to keep them.
Camera phone pics later. If the new phone takes decent pics, there will be some good ones in there.
Hi Chris...
Posted by: Gint Apr 29 2006, 06:10 PM
Opposite side of the city. Aurora (Centennial).
I couldn't make it today...
Too cold for ya huh?
Posted by: one914racer Apr 29 2006, 06:40 PM
Posted by: BMartin914 Apr 29 2006, 09:42 PM
Opposite side of the city. Aurora (Centennial).
I couldn't make it today...
Too cold for ya huh?
Hey Mike, I have a present for you...
Posted by: Gint Apr 30 2006, 07:30 AM
Andy wasn't here, hey're cell phone pics...
Attached image(s)
Posted by: Gint Apr 30 2006, 07:31 AM
The easiest way to remove a rear suspension.
Attached image(s)
Posted by: Gint Apr 30 2006, 07:32 AM
Almost done. This one came apart in less than 2 hours.
Attached image(s)
Posted by: Gint Apr 30 2006, 07:33 AM
And the easy way to remove a front suspension.
Attached image(s)
Posted by: Gint Apr 30 2006, 07:34 AM
The remains...
Attached image(s)
Posted by: Gint Apr 30 2006, 07:35 AM
Some of the participants' trusty rides.
Attached image(s)
Posted by: Gint Apr 30 2006, 07:37 AM
This little bugger was rolled and rusty. And pretty damn tough. It had one hell of an appetite for sawzall blades.
Attached image(s)
Posted by: Gint Apr 30 2006, 07:39 AM
Engine removal by sawzall. We'd never tried it this way before, so what the hell!
Attached image(s)
Posted by: Gint Apr 30 2006, 07:39 AM
One more shot of the zambezi 914. 
Attached image(s)
Posted by: majkos Apr 30 2006, 08:43 AM
As always,beautiful pictures!
Posted by: brant Apr 30 2006, 08:52 AM
wow..
great pictures
great work
nice job and thanks for sharing
brant
Posted by: Joe Owensby Apr 30 2006, 04:56 PM
Thanks for sharing the photos.
If you have a piece of floorboard that goes on the drivers side near the holes for the brake master cyl., I am in need of this. I have a repo floorboard, but this only goes up to the end of the flat section of the floorboard. I also need to replace the lower section of the hump on the left side of the driver's footwell, and the section of the floorpan that goes upward from the flat. Willing to buy this if it has minimum rust. Otherwise, I will just have to fab something. Thanks, Joe
Posted by: fitsbain Apr 30 2006, 05:13 PM
All those parts I could use to fix my rust!!! 
How come all the cars that get cut up are on the left coast?
I need the bottom of the firewall and the engine trays!!!
Posted by: effutuo101 Apr 30 2006, 07:25 PM
I need all of the Ebrake stuff. Let me know if you you could salvage any of the parts and I will send $.
Good to see pic's of everybody!
Chris
Posted by: jsteele22 Apr 30 2006, 07:57 PM
All those parts I could use to fix my rust!!!
How come all the cars that get cut up are on the left coast?
I need the bottom of the firewall and the engine trays!!!
Uh, it's still a couple of days drive from Colorado to the land of fruits, flakes and un-rusted teeners on every street-corner. But I feel your pain. The first teener I looked at (for some reason ) was driven here from Boston. Had to close the door before you got in.
Thanks for the pics, Gint. One fo these days, I'll try and make it up North for sumpn'
Posted by: majkos Apr 30 2006, 09:50 PM
I need all of the Ebrake stuff. Let me know if you you could salvage any of the parts and I will send $.
Good to see pic's of everybody!
Chris
Hey Chris!
Ge whiz,had I known you need some E brakes stuff,would've given you the Yellow GT's!
Now you gotta go through REX!
Posted by: 914runnow May 1 2006, 01:24 AM
I need all of the Ebrake stuff. Let me know if you you could salvage any of the parts and I will send $.
Good to see pic's of everybody!
Chris
Hey Chris Should have most of it if not all of it..
Wher do you need it to start and end so to speak..
AND HEY WE MISS YAH HERE BUDDY!!!
And this was me on Saturday...
Lemmeno//Thanx Rx
Posted by: 914runnow May 1 2006, 10:04 AM
Thanks for sharing the photos.
If you have a piece of floorboard that goes on the drivers side near the holes for the brake master cyl., I am in need of this. I have a repo floorboard, but this only goes up to the end of the flat section of the floorboard. I also need to replace the lower section of the hump on the left side of the driver's footwell, and the section of the floorpan that goes upward from the flat. Willing to buy this if it has minimum rust. Otherwise, I will just have to fab something. Thanks, Joe
KEVIN FROM OUR GROUP HAS ALL OF THE FLOOR PAN PIECES THAT THE TWO OF YOU WERE ASKING FOR....I WOUND UP WITH ...FENDERS....SUSPENTION POINTS FOR FRONT AND REAR.....BRAKE PARTS AND HD LITE BUCKETS AND VARIOUS BRACES...AND OF COURSE I HAVE OVER 2000 914 PARTS IN 'SHORT BASEMENT'...!! Sooooooo getaholdofKevin..BEFORE HE MAKES HIS METAL RUN!!
Posted by: Ferg May 1 2006, 10:24 AM
sorry I missed the fun...
I was somewhere lost in the moutains participating in one person's sick idea of a fun bacholor party. Started 
at 10AM, and it involved running a pre-determined course with six drinking stations. It was fun it a sick sorta way, but running get's tough after the 3rd shot of Jim Beam, combined with 3 shotgunned beers, and some unknown amount of jagermeister... 
I think it took us 5 hours to cover maybe 4 miles of trail... 
Ferg. 
Posted by: majkos May 1 2006, 03:47 PM
sorry I missed the fun...
I was somewhere lost in the moutains participating in one person's sick idea of a fun bacholor party. Started
at 10AM, and it involved running a pre-determined course with six drinking stations. It was fun it a sick sorta way, but running get's tough after the 3rd shot of Jim Beam, combined with 3 shotgunned beers, and some unknown amount of jagermeister... I think it took us 5 hours to cover maybe 4 miles of trail...
Ferg.
I WAS AT THE WRONG PLACE! I would carry ya through. 
Posted by: Gint May 1 2006, 07:16 PM
sorry I missed the fun...
I was somewhere lost in the moutains participating in one person's sick idea of a fun bacholor party. Started
at 10AM, and it involved running a pre-determined course with six drinking stations. It was fun it a sick sorta way, but running get's tough after the 3rd shot of Jim Beam, combined with 3 shotgunned beers, and some unknown amount of jagermeister... I think it took us 5 hours to cover maybe 4 miles of trail...
Ferg.
And the stripper(s) showed up... where... exactly?
Posted by: JOHNMAN May 1 2006, 08:44 PM
Cut up the green one...
Cut up the green one...
Posted by: effutuo101 May 1 2006, 09:45 PM
Hey Rex! Good to hear from you! I need all of the ebrake stuff. cables handle, everything. email me a $ amount incl shipping and we will work it out. Thanks! BTW. I miss all of you as well! But, I do not miss that white stuff that falls out of the sky 
take care and good to see everybody in the pictures!
Chris
Posted by: TROJANMAN May 1 2006, 09:48 PM
BTW. I miss all of you as well! But, I do not miss that white stuff that falls out of the sky
how could you, with all of that wet stuff
coming to red rocks this year chris?
Posted by: 914runnow May 2 2006, 12:14 AM
Hey Rex! Good to hear from you! I need all of the ebrake stuff. cables handle, everything. email me a $ amount incl shipping and we will work it out. Thanks! BTW. I miss all of you as well! But, I do not miss that white stuff that falls out of the sky
take care and good to see everybody in the pictures!
Chris
A folding handle or straight handle for the ebrake??
Posted by: 914runnow May 29 2006, 03:26 PM
Hey Rex! Good to hear from you! I need all of the ebrake stuff. cables handle, everything. email me a $ amount incl shipping and we will work it out. Thanks! BTW. I miss all of you as well! But, I do not miss that white stuff that falls out of the sky
take care and good to see everybody in the pictures!
Chris
Never heard back from you on the handle design..
See above..posts..
Do you still want the parts??
Thanx Rx
PS..I am up to 7 grandkidz now....
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)