Hi
I'm in West Chester, PA and want to see about getting my chrome bumpers redone. Anybody know a local shop that does a good job? Thanks
Try these guys in NJ
http://www.nu-chrome.com/index.html
Thanks Qarl
I know you said "local", but I think that it's in the relative area (drivable) from Philly.
i think they are in MA not NJ.
never used these guys but they are near by (up rt 100) and have been around for some time. I have been by their shop and it looks professional
http://www.pottstownplatingworks.com/main/index.htm
Let me know if you use these guys or have any feedback about them I may need to use them also.
You're right... don't know why I thought New Jersey.
Years ago I used Martin's Metal Specialties up in the Tacony area of Philly for rechroming a 50 Studebaker. They've advertised for many years in Hemmings and a few other resto periodicals. I thought they did too much grinding and too little plating and polishing to fill pits. Original pieces were pitted, but edge definition and letters were good before plating, rounded edges and indistinct lettering after...
FB, Where in West Chester? I'm in Downingtown, and work up above Exton.
Harvey
Attached image(s)
Also found this in the same area....don't know anything about them but you may be able to get 2 quotes while you're up there.
Pottsgrove Metal Finishing, Inc.
P.O. Box 431
Pottstown, PA 19464-0431
Phone: 610-323-7004
Fax: 610-323-2908
Plating Information
Metal Polishing, Copper Plating, Nickel Plating, Chrome Plating, Electroless Nickel Plating, On Most Metals
Company Information
Metal Plating: Copper, Nickel, Brass, Electroless Nickel & Polishing On Most Metals Including Zinc, Die Castings & Aluminum
I used these guys when I rechromed the rear bumper on my 74 beetle.
All-Brite Metal Finishing
2148 East Tucker Street
Philadelphia, PA 19125
Phone: 215-423-2234
I worked with Eddie Howard
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)