Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Flappers

Posted by: rdauenhauer May 3 2006, 10:12 PM

Its alway interesting tearing down motors others have built.
Ripping into the 2.0 I found that the flapper over the Oil cooler had been
*locked down*
Why would someone do this?
the curious thing is the car ran great and never overheated, according to my
console gauge. Evan after the punishment taken driving it to WCC around Streets of Willow and back to Sea.

Posted by: jhadler May 3 2006, 10:17 PM

Makes sense to me. I take it the thermostat had been disconnected?

The position of the flapper is the "hot" position. The motor may take a tad longer to get up to temp, but that's the failsafe position for the flapper.

-Josh2

Posted by: SirAndy May 4 2006, 12:28 AM

QUOTE(jhadler @ May 3 2006, 09:17 PM)

Makes sense to me.

flapper *down* on the pass. side means always full cooling air to the oilcooler!
and that's usually a good thing ...

Andy

Posted by: rdauenhauer May 4 2006, 09:55 AM

QUOTE

I take it the thermostat had been disconnected?

Not. But Oh well. appears no harm rusulted Id just never seen it, where the flapper was installed under the tin for th Oil cooler + have the Thermo cable functional.