yeah, lets see, today i: found a crack in the trailing arm in the 72. rounded off the bolt in the engine mounting bar in the 70 ( and yes tomorrow i'm cutting the shit out of it), and now the vcr - yes vcr, its an old movie - ate my LeMans video. i think i should do nothing else tonight
Soak all future bolts to be removed with PB Blaster a day before wrenching..............buy a DVD player...........welding lessons?
always seems to travel in 3s, don't it?
So, you should be CARmically good for a while.
drink
tequila - lots of tequila
Personaly I preffer Cazadores chilled in a shaker with a water back.
Cazadores, Porfavores.
:PERMAGRIN: Joe
course rum is always good too ---- "but the rum, what happened to all the rum?"
bacardi select
Lemonade with a water back and a bowl.
bummer...can we see the broken the trailing arm??
EEk, thats the suspention ear. Gonna need to do a full clean and inspect on it and then have the crack welded up. If it is just that crack it may be nothing big, but you should definetly check. Too bad it was not the arm, those are easy to change.
pull the arm. see if you can sandblast that area.....
get ready to weld, and go for a damage exploration...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)