Printable Version of Topic

Posted by: bd1308 May 24 2006, 05:56 PM

OK, so not only did a E-brake cable and a clutch cable become useless and riuned by the incident, but I found that my speedometer cable is leaking black oil-like substance all over the exterior of the cable, or was...

Anyway, I cant see where the clutch cable attaches to the clutster, nor can I make the pedal go to the floor, because it is currently connected and it is rather dark outside...

show me what i can't see....

b

Posted by: So.Cal.914 May 24 2006, 06:04 PM

Disconnect clutch cable at the rear.

Posted by: rhodyguy May 25 2006, 08:46 AM

it's all pretty detailed in the chapter regarding the clutch, in your haynes manual.

k

Posted by: SLITS May 25 2006, 08:51 AM

It's daylight.....go look at it now or buy a flashlight if you are nocturnal.

Posted by: TROJANMAN May 25 2006, 09:14 AM

the black oil like substance is probably black oil :brilliant:

What exactly are you looking for? you didn;t post much of a question?
I am sure there are alot of things you can;t see.
Take "R" rated movies for one.

seriously, are you trying to hook up your clutch cable, or what?
what incident? did i miss another post?

loosen the cable inthe rear (as suggested) if you are trying to hook it up at the assembly. it will give you more room to work with. i am guessing you have already removed your carpet and pedal board?

Posted by: dwillouby May 25 2006, 11:15 AM

Britt,
I corrently have my pedal cluster out of the car. You could stop by and see how everything hooks up.

We still up for the rust repair?

David

Posted by: Aaron Cox May 25 2006, 11:18 AM

QUOTE(TROJANMAN @ May 25 2006, 08:14 AM)

the black oil like substance is probably black oil :brilliant:
....
I am sure there are alot of things you can;t see.
Take "R" rated movies for one.

Posted by: bd1308 May 25 2006, 11:24 AM

Yes we're still up for the rust repair....I just hope I have enough detail to explain the extent of the rust...but then again at worst we'll get the firewall fixed and the floorpan fixed. I think I'll be amazed at the end of this I think.

:bitingnails:

b

Posted by: dwillouby May 25 2006, 11:47 AM

What day are we doing this? I think you said the 1st. Thats thursday. The weekend is much better for me.
Let me know your address and what time to show up.
David

Posted by: bd1308 May 25 2006, 03:55 PM

fixed.

this thread is closed.

Posted by: rhodyguy May 25 2006, 05:37 PM

ok.

Posted by: grasshopper May 25 2006, 05:42 PM

hey dwillouby, It will take more than one day, so I wil be working late, as late as I can, and not make anyone mad with the grinding and welding and cutting..do you happen to have an air compressor you could bring?? sorry for the hijack britt

Posted by: dwillouby May 25 2006, 06:11 PM

No my compressor is not portable. I can come after work Thursday and Friday,Help all day Sat.
Let me know.

David

Posted by: grasshopper May 25 2006, 06:28 PM

new thread, check in there