I have a wiring problem that I can't figure out. Currently all the lights are working correctly, blinkers, driving, back up, brake. But, when I turn the ignition on, the blinker lights in the dash are on and the left rear driving and side marker lights are on. I have unplugged the gray/black wire, which turns the driving and side marker lights off, but the dash blinkers stayed on. When I drive the car and use the blinkers after a few turn signals, the blinker lights in the dash finally go out. They will blink when the turn indicator is turned on....
I checked the wiring in the left rear and it appears to be wired up correctly, so where do I check next? Obviously the rear lights are getting constant power from somewhere, I just don't know where to check next...
-- Rob
Turn signal relay is sticking.
Bump for Rob,
Turn signal relay is exactly where the BOOK says it is.
Sorry I couldn't resist that one.
and no head light relays won't work.
FLAPS have them.
or you could pull yours and open it up and clean it.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)