I am looking for a little advice.
I used to own a 914 many years ago and ever since I sold it I have had dreams of owning one again. Especially a 6xr.
A lot of things have gone on over the years to where it was never a good time to get one but then finally I decided I just have to have one again.
Anyways I have been searching off and on for the last few months and then just the other day came across this site and have been lurking around...
You all seem like a great bunch of people with alot of good info and I was wondering if any of you know this car and what are your thoughts on how much something like this would go for? If you know the car what is your opinion of it too.
It is a 914-6 2.4 conversion.
http://www.pbase.com/drodey1/914-6&page=all
http://forums.pelicanparts.com/showthread.php?threadid=283450
Many thanks in advance.
welcome...Come right in!
KT
Nice looking car.
I'd think $15k plus, easy...
KT
Attached image(s)
Welcome!!!
If you want some advise, or just want to see a similar 914-6 conversion, just drop me a note. I am in Hurst, and I work in Addison. After messing with 914s for 20 years, I think I know a thing or two about them...
I also know most of the locals too.
The car you are looking at looks good. But considering its not local to the DFW area, maybe one of our members IS local and would be willing to do a PPI on it for you....
Anyone.. Bueller ... Buelller....?
looks like an amazing car!
Thanks for the advice guys.
I really like the car alot from what I have seen in the pics and have have exchanged a few emails with the seller.
I will see exactly where the car is located and see if anyone out there wouldn't mind doing a once over on it for me.
Thanks
there's something about an orange six....one of my favorites. I like those bars he welded in to support the rear towers too.
I've seen the car in person before around town. Its a really sweet ride. I dont know the owner or its internal condition, but I'd definetly check it out!
Konrad
That would be great!
I will shoot you an email with some details, his phone number etc...
By the way he says an Albert Broadfoot just rebuilt the engine, still needs to be broken in.
http://www.broadfootracing.com/
Anybody know of him? Is he good?
He also says there is no additional/external oil cooler.
Is that a bad thing for 6xr?
Thanks again for all the welcomes and advice everyone.
Sweet ride.
2.4 conversion is where I have been leaning with my ride.
The external oil cooler debate has come up a few times in the recent past.
For a driver it seems you would not need it. If you plan on running the car on the track you probably will need it. As I said I am hoping to be able to fun a 2.4 conversion soon so I am passing along what I have read here not my experience.
I'm sure someone will chime in soon.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)