Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ pilot driving light

Posted by: will Jun 6 2006, 01:59 PM

i am about to install my pilot driving light in replacement of the fog lights. any suggestions on wiring before I tear it up this evening (which color wire attach to which wire on the pilot light?).
thanks.
will

Posted by: lapuwali Jun 6 2006, 02:05 PM

Light bulbs aren't polarized. You can connect the wires either way. I believe the wires on the lights are white and black, and you may as well use black for ground and white for power. Use 14g wire.

Posted by: blitZ Jun 6 2006, 02:34 PM

My car did not come with fog lights, however when I added them the wiring was already there. I installed the switch and found the three wires for the switch. The switch wires on the later models are brown, red/grey, blue/black. In the front trunk there is a ground (brown) and a yellow/white to attach the lights. Hope this helps.