Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ NEW TYPE lV CYL STUDS

Posted by: Type 4 Unleashed Jun 8 2006, 11:22 PM

8740 Chrom Moly cut to fit cyl studs
190,000 psi
.900" longer than stock
I'am installing a set tomorrow in a case, to check fitment.
There are also, 8740 10mm case thru studs, which the very first set are currently installed in my motor.

IPB Image

Posted by: Aaron Cox Jun 8 2006, 11:32 PM

very nice!

Posted by: Type 4 Unleashed Jun 9 2006, 12:48 AM

The Pictures suck, I'll get better ones tomorrow.

Posted by: Type 4 Unleashed Jun 10 2006, 12:34 AM

I, test fitted a set to my case today, it required the threads be cleaned up, (tappped clean).

I, installed a 105mm cyl with over .800" of cyl spacers, and the studs still required to be cut.

I, forgot my camera

I, swaped out a pic of the studs, a little better, but these things just don't like to be shot.

I'am running them in my new motor, along with the 10mm case thru bolts, that I'am already using in my current motor.