Can someone tell me what wire goes where on the coil. I replaced my old one and can't remember where the wires go. I have the condensor wire and 2 more.
Thanks
black goes to +
condensor and the black wire with purple stripe goes to -
b
The point wire goes to the terminal marked "1", and the tach wire goes there as well. The 12v+ wire goes to the terminmal marked "15". The point wire is green, the tach wire is black with a purple tracer. The 12v + wire is heavier, and black. The "1" terminal may be marked "-", and the "15" terminal may be marked "+". That should get you there. If your wiring is kludged, or the coil is an off brand, these instructions may not be valid. The Cap'n
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)