Hey Guys I have a 70-74 factory 3 port fuel pump. I tested it with 12 volts and it runs. I tested for fuel flow by taking the suction and return hoses and submerging them in a container of gas and routed the discharge hose to an empty container. When power is supplied to the pump it leaks around the black plastic electrical plug that the wiring harness plugs into and is putting out no fuel from the discharge hose. Is this repairable or did I route the hoses wrong. Thanks. Bill
It's done.
Get ready to spend some $$$$. Iffin' you can find one.
take it apart and fix it
just replace it and relocate it to the front trunk. New hi pressure pumps are around $150, you need 39psi iirc.
If you really want to stay OG, I have a three port on my shelf
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)