Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ where to buy progressive carb

Posted by: jimkelly Jun 21 2006, 07:34 PM

any ideas?

Attached image(s)

Posted by: Thack Jun 21 2006, 07:43 PM

I get those red intake boots real cheap. Less than $2 each from BAP Geon. You can find rebuild kits on ebay.

Posted by: root Jun 21 2006, 07:47 PM

Turbo XS has all sizes of silicone hose...bet they would have something that would work!

http://www.turboxs.com/contact.htm

I say call them with dimensions..... do I need to dig through the microjunk yard and measure them for you?

going to bed,,,,

Posted by: root Jun 21 2006, 07:48 PM

Nevermind, Thack's got you covered!

Posted by: lapuwali Jun 21 2006, 08:05 PM

As for a rebuild kit, pretty much anyplace that sells Webers: Pierce Manifolds, Redline Carbs, etc., will have rebuild kits. You'll need to identify which flavor you have (DGV, DFV, DGAV, DGEV, DFAV, etc), which should be cast or stamped on the body somewhere.

Posted by: Cap'n Krusty Jun 21 2006, 08:09 PM

QUOTE(Thack @ Jun 21 2006, 06:43 PM)

I get those red intake boots real cheap. Less than $2 each from BAP Geon. You can find rebuild kits on ebay.

They're made for Type 1, '71-'74, and Type 2 '71. The Cap'n

Posted by: Thack Jun 21 2006, 08:09 PM

http://cgi.ebay.com/WEBER-DGV-DGAV-32-36-CARBURETOR-REBUILD-KIT_W0QQitemZ8018567075QQcategoryZ33551QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

$11 rebuild kit. Did you need the carb itself? If you don't have a BAP Geon near you I can ship you some boots.

Posted by: jimkelly Jun 21 2006, 08:18 PM

Looks like there in one in VA - cool - and thank for the ebay link - Jim

Bap Geon Import Auto Parts
7655 Granby St
Norfolk, VA 23505-2508 View Map
(757) 440-0004

Posted by: dinomium Jun 22 2006, 10:10 AM

I got mine at FLAPS, but they dont come with the FLOAT!

Float sold sepratly!!