bump
I may only be meeting you guys at the picnic but I'll be there none the less (barring some unforeseen calamity). Already talked to the boss-man to let him know I will be out of town that weekend.
Rick
you getting a "package" that weekend?
Lets hope. Has Brad mentioned it? My package won't be as nice as yours was. But it's something to start with.
Rick
All I know is that it's a project package.
All systems GO.
B
Sean,
I saw on TV6 something about construction on SR 46.
Jerry
Indy
there is a bit of construction of I46. It may be a small pain, but nothing major (hopefully)!
I will leave here on Tues. with a planned arrival time of Thursday evening.
If anyone in Indianapolis wants to get together for a lunch or dinner on Friday.. I'm up for it.
Also... Sean.. if you want to do a improptu tech session in someones garage... sign me up.
Let me know what you think. I will also show up early enough to go over anything you may have found on your car that needs addressing (other than the shift bushings and tranny mounts).
B
I put the 50's back in and got some O rings at Lowe's. We lost an idle jet holder on the way home. The one without the O ring.
I haven't had to clean the jets out since Monday. I can't figure out why the damn amp won't shut off. It's utilizing the lead from the head unit
I do need a valve adjustment.
Something I forgot to tell you.. WASH the air cleaners and re-oil them. Use warm soapy water in the bathtub and fill it up about 3-4 inches with water and "swish" them back and forth in the tub. Use dish washing soap. This will push the dirt out. Go to the nearest motorcycle shop to buy the K+N oil (before you start). Dont buy the K+N "cleaner".
I'll see if I have some 45's. Here at sea level the revving was very very crisp. A lot of that has to do with off idle transition.
B
any reason to get a couple different sized main jets?
The plugs looked real good to me at Sea level. I think the mains where fine.
We modified your air cleaner bases so you could pull them out without disassembling the whole damn thing.
I'm going to bring a complete set of 44's with me that I jetted for another 500 lift cammed 2.0
Oh.. you made a comment about the rubber washers under the wing nuts.... I "sold" those to you. Your kit didnt come with them.
B
they work well.
joseph needs them...he loses wingnuts
do you just drill a hole in one of the wings?
or the threaded rod?
Its more of an issue on 6 cyl engines than it is on a 4cyl.
Its also a pain in the ASS to rewire everything evertime you need to sync or change jets on the carbs.
B
I like safety wire, I LOVE safety wire tools!
Please tell me more than 5 914's are coming. Where are all those SMOG guys?
DOH !!
3 runs back to back to back.
Why are we getting SMOG news so late ??
B
tell me more. where are you meeting? what time? i might try to get there.
We are meeting in Columbus, IN.
There is a thread at the top of this page that has ALL details.
We'd love to have you at the even Jeff.
BW3 Greenwood is gone. So, that one is out of the question.
These are my suggestions:
1. http://www.oakenbarrel.com/
2. Hooter's Greenwood
SPEAK UP!
Hooters Greenwood (if it doesnt offend anyone)
B
Sounds like Hooters it is then.
What is the itinerary for Friday then? Hanging out at Sean's until time for dinner?
Sean doesn't mind, right?
Friday,
valve adjustment
shifter adjustment
speedo cable replacement
speedo drive replacement (1st so cable isn't used if it's not necessary)
that should just about do it I hope.
When are you starting? When do you think you'll be done?
I dunno.
Brad's supposed to be here late thursday.
depends when he's up to it.
Cool. If you're willing, I'd love to stop by and waste time until dinner. I really don't want to drive up to Noblesville just to turn around and drive back down to Greenwood. And as I'll leave the office around 3:30, I might be able to lend a (inexperienced) hand if you're still working on the car.
Eager to learn!
Dan
call the house friday
three two two ten forty-seven
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)