Printable Version of Topic

Posted by: Headrage Jul 3 2006, 02:33 PM

Does anyone have a list of the various screws used to attach all the door panel hardware?

I got two nice panels to put on but don't know what size screws to get.

Posted by: johannes Jul 3 2006, 04:30 PM

You should have asked two weeks ago ... I changed my panels ...

Can only remember that there are very few screws.

Posted by: "Z" Jul 3 2006, 04:41 PM

No screws....the panels go in with push pins that slip into holes on the inside of the panel.....the handles use screws.

Posted by: Headrage Jul 3 2006, 05:11 PM

I'm talking about the screws that hold the door handle surround, arm rests and map pockets.

Posted by: Headrage Jul 4 2006, 10:00 AM

Posted by: "Z" Jul 4 2006, 10:12 AM

Hmmm, they are specific for the task. I would recognize them in a jar of spare nuts and bolts...%^B

What happened to the fasteners? Did the father in law "organize" your fastener drawer?

The armrests use an allen headed screw....the handle has two different length cross topped screws. Be carefull that you don't use one that's too long....it will impede the latch and not allow full actuation and the door won't oepn from the inside.

Posted by: Headrage Jul 4 2006, 10:28 AM

Car didn't come with any.

Scrap door panels were in the trunk when I got it...

Posted by: Mueller Jul 4 2006, 10:31 AM

would the PET list them?

Posted by: boxstr Jul 4 2006, 10:38 AM

Allan I have some screws on a parts car that I can take off tommorrow. Call me on Thursday to remind me. 503-799-5794
Craig

Posted by: "Z" Jul 4 2006, 10:44 AM

Ah....I have a couple of boxes full of fasteners from the 10-11 914s that I have pulled apart. Whenever you get out here...we can paw threw it.