Printable Version of Topic

Posted by: toon1 Jul 7 2006, 12:41 PM

the munts for the cali. vito. mirrors didn't seem like they where going to work. It looked like they had the wrong angles.

armed with a mill at work, I got busy. this is what I came up with


Attached image(s)

Posted by: toon1 Jul 7 2006, 12:42 PM

one more


Attached image(s)

Posted by: turboman808 Jul 7 2006, 01:03 PM

Cool

Now ya want to make some honda cbr mirror mounts? Mine came out pretty good but I didn't make em from scratch like yours so they could have been better

Posted by: toon1 Jul 7 2006, 01:12 PM

got any pics? these took awhile to make. They came out a little on the big side but I wanted to use the rubber gasket supplied with the mirrors.

Posted by: turboman808 Jul 7 2006, 01:36 PM

Nothing close up. I used the stock holes so I had to drill out one hole and fill in the one that didn't line up with body filler.

Posted by: toon1 Jul 7 2006, 04:34 PM

those are slick! how is the viewthrough them? Mine is a little small, the mirror tends to buzz but they work. They get a few points for cool looks.

Posted by: turboman808 Jul 7 2006, 04:39 PM

They work really good. They don't shake at all. Work even at high speed. But oddly enough they are easy to move and adjust. If I had the tools though I would have liked to make my own bracket.