In the Classic threads forum, there's a new Conversions FAQ. I've added the Six conversion section (since I'm in the middle of doing one, I think I know enough to answer this).
I know zippo about V8 or Subaru conversions, so if you've done one and would like to contribute, please write up something more or less in the same format, and PM it to me. I'll edit it for spelling, grammer, etc., and will list you as the contributor in the section. If more than one person delivers good stuff, I'll merge as required and credit all of you.
If you've ever done a 915 or 930 conversion, detail there would also be very helpful. Since this is common to several kinds of engine swaps, I'll add a specific "What's involved in a 915/930 conversion" section.
I've done a few (dozen) V8's and JUST finshed a Subaru (tuning the standalone still), and will be happy to write one over the weekend.
BJH
Good idea..................I've done cad drawings for the engine mounts, and water pumps and alt. mounts for both a SBC and a LS1 914 conversion. I also wrote up a instruction sheet for a 914 V8 tach conversion and how to calibrate it. I'll put the dwg. files in pdf format and post in the classics forum later.
Bob
You can't actually post in the Classics forum, so PM anything to me.
I want to be clear, this isn't a detailed HOW to do a V8 conversion topic (that would be way too long, and really require a tech article), but more of a "I'm thinking of doing a V8 conversion, what's involved, and how much does it cost?" kind of topic.
I think it would be great if someone did write up a blow-by-blow thread, with photos and diagrams, of how to do a V8 conversion. That would go into the Classic Threads section right away.
I'm going to try to do just that for a Six conversion. I have to get all of the parts, first.
If you would like, I could make one...
Glad to be of authority!
If you would like, I can focus on the low buck aspect, and the other guys can write the other stuff... Or I could write a whole shebang, and you can take what you want... but im kinda lazy... and dont feel like writing 4 pages... lol
Write whatever you feel like writing, and I'll paste it all together.
V8 guys. We have a Subaru section, and a 911 section, but still no V8 section. The existing sections are an excellent template for how to write one.
Yes, you can use the stock ECUs. Lots of people have done so.
Once I've sucessfully done it, I'll write up a bit about what it takes to make an LT1 fit, and why it's not easy.
(with stock intake manifold)
James,
There's tons of info already written, we just need a summary for a newbie considering the conversion. Ideally a flow chart. I'm time broke at the moment but I'm sure others can/will contribute.
I'd post these thread links to start:
-non-OEM conversions on 914world.com
-propricers book in Resources
-Andyrew
-Dr Roger
-Skline
-Nickm
-nine14cats
-914GT
-wbertho
-drive-ability
-byunbads M-?
-Chris Julian
-Ajracer
-my Jaideresurrection
-John2k
there are likely more I missed...
i'm in. I was alredy thinking of a condensed progress summary without all the fluff. "to V8 or not to V8. That is the question".
Emailing me a word doc won't work, anyway. I don't do Word (I'm one of those Unix weenies). Save it as a text file. I'll fix any formatting problems.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)