It's sparking at the connection point of the distrib wire to the torque coil. I'm wondering if it is time for a new wire from the distrib to the torque coil of my electronic Ignition (Jacobs I.C.E. Pak http://www.jacobselectronics.com/products/energypaks/icepak.htm) or if the torque coil may need replacing?
Any ideas anyone?
Sounds like a new wire to me. The Jacobs stuff is pretty strong.. it takes some decent wires to contain the energy.
B
Yep that did the trick. I put an 8mm suppressor wire on and Voila! no more sparking. Thanks for the input. I like those low cost solutions.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)