Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Front wheels are really close to the front of the fender

Posted by: turboman808 Jul 9 2006, 04:36 PM

Put the 17s on and they sit really close to the front fender. I took out the angle grinder to remove this sharp edge on the inside. Lots of room behind though. Is there like some modification that might have been done to the car to put the wheels further forward?

It's seems to be fine but it is real close. Think when I get the fenders reshaped I may have to remove a 1/2 inch of fender metal on the fornt.

Posted by: Dr. Roger Jul 9 2006, 05:03 PM

same situation on mine. a little trim and a little roll, no problem. =-)

mine is lowered on 18X8's on the front.

Posted by: Aaron Cox Jul 9 2006, 06:39 PM

need pics!

how wide are the fronts? i run 7" no prob on STOCK fenders on a slammed car...

8's require some pulling and stetching

Posted by: Dr Evil Jul 9 2006, 08:32 PM

I have 17x7.5 in the front with no problems.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)