Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Driving lights troubleshooting

Posted by: r_towle Jul 22 2006, 10:51 AM

Hi, the book seems to be useless for the driving lights.

Which relay is it...?
I have never had them work, but I finally got bulbs..
All the wiring is there, and clean.

car on, headlights on, driving lights switch on...high and low beam..nada. no driving lights worky....

where to check.

Can I swap some other relay from my stash in there...like a normal high beam low beam realy, or are they different???

And, which fuse...from the left???

Rich

Posted by: lapuwali Jul 22 2006, 11:02 AM

Read the FAQ, dude...

Posted by: r_towle Jul 22 2006, 11:12 AM

first off, its in the calssic section..nothing in the FAQ is related...

Thanx for the direction, but alas the question is still not answered.

Why relay is for the driving lights?
Ok, fuse #10...

I gotta figure out which one to replace/clean...

Rich

Posted by: lapuwali Jul 22 2006, 12:45 PM

White/yellow wires are driving lights, so the relay with a white/yellow wire coming out of it will be the one you want.

Posted by: Joe Sharp Jul 22 2006, 12:51 PM

While I was in there I gave my relay fused power with the ignition on. So I could put them on without the lights.
:PERMAGRIN: Joe