Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ BAR SWAP and Springs?

Posted by: ffranktly Aug 1 2006, 10:06 AM

i have a 22mm Weltmeister Sway Bar and 250# springs, on a 75 2.0, and if anyone would like to swap, i need a 19mm Bar and #140 springs. thanks!... frank smash.gif

and if anyone needs my Bar and Springs when i do the changeover, i can sell you mine and have them sent. beerchug.gif

Posted by: Mueller Aug 1 2006, 11:01 AM

I can do the front bar (let me double check the dia, but I'm pretty darn sure it's the smaller of the 2)....bar only has about 100 miles on it (60 miles of that on the back of a AAA tow truck headbang.gif )

Posted by: maf914 Aug 1 2006, 11:20 AM

I don't want to sabotage Mike's offer, but...

Is a 22mm Wetmeister bar too big to run with 140# springs, assuming stock T-bars and equal size tires front and rear? Is there enough adjustment to run it soft enough?

Posted by: Aaron Cox Aug 1 2006, 12:47 PM

set on full soft it should be fine.....


Posted by: ffranktly Aug 2 2006, 10:29 AM

thanks guys, and ill wait to hear from you Mueller! does anyone need the 22mm Weltmeister?

Posted by: Heeltoe914 Aug 2 2006, 10:32 AM

Is this a rear bar?

Posted by: maf914 Aug 2 2006, 10:36 AM

I assume it's a front sway bar. Weltmeister makes 19mm and 22mm sway bars for the front and a 16mm bar for the rear for 914's.

Posted by: ffranktly Aug 2 2006, 12:16 PM

i haven't had the car up on a hoist and i just bought the car from joseph mills, but going by what joseph says, it is a rear 22m Weltmeister sway bar

Posted by: ffranktly Aug 2 2006, 12:20 PM

OOPs... my bad,, you are right, i read the specs again... it is the front sway bar icon8.gif

Posted by: Mueller Aug 3 2006, 10:19 PM

I just checked, my bar is a 19mm Welt, I won't be able to remove until this weekend.....

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)