Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 12 Point Bit Set

Posted by: akellym Aug 8 2006, 10:34 AM

I can't seem to find anyone that has a 12 point bit in 13mm so I can take out the bolt holding in the oil relief valve on the side of the motor. Anyone know where I can get one? I'm assuming it's 13mm since my 12mm is just a little to small.

Posted by: Matt Romanowski Aug 8 2006, 10:37 AM

A 3/8" socket extension fits the bill very nicely.

Matt

Posted by: smontanaro Aug 8 2006, 10:53 AM

QUOTE(akellym @ Aug 8 2006, 11:34 AM)

I can't seem to find anyone that has a 12 point bit in 13mm... Anyone know where I can get one?

Snap-On maybe?

http://buy1.snapon.com/catalog/catalog.asp

Skip

Posted by: Aaron Cox Aug 8 2006, 10:54 AM

QUOTE(Matt Romanowski @ Aug 8 2006, 09:37 AM)

A 3/8" socket extension fits the bill very nicely.

Matt

YES!!!

the square end of a 3/8 drive extension is all you need!!!

Posted by: rjames Aug 8 2006, 12:31 PM

Sears (Craftsman brand) sells 'em too...

Posted by: Dr Evil Aug 8 2006, 12:37 PM

Doesnt AutoZone have a set. I could have sworn I got one there once and saw them there reacently.

Posted by: Jake Raby Aug 8 2006, 01:45 PM

Hit it one lick with a hammer and it'll unscrew with your fingers...

Or use the extension trick.

Posted by: akellym Aug 8 2006, 01:48 PM

Thanks for the help The auto stores do have set, but only go to 12mm.