i have a 13mm front sway bar and i no longer have the bushings that go in the eyes of the drop links.
pelican offers the bushings from a 74 and i would like to know if the eyes are the same size as the 69 links...
the picture was taken at an angle so i dont think it represents the size well they are roughly 26mm.
anyone know if the 74s are the same size?
-shag
Attached image(s)
use 914 droplinks and bushings!
911 ones are about an inch too long, and 914 bushings are available
YOU NEED 914 LINKS.....no exceptions.
yes i understand they are too long and as i had previously expressed in another thread they are going to be modified.
but will the 74 bushings fit a 69 eye?
sorry, no idea on the bushing fitment, just make sure whomever modifies those for you makes them as strong or stronger than the originals...a poor weld can lead to injury or death if the link fails while going around a corner
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)