Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Where can I get these

Posted by: BMXerror Aug 21 2006, 04:05 PM

Does anybody know where to get the gaskets that go between the intake runners and the head? I don't mean the spacer, but the paper gaskets that go on either side. I got some with my engine gasket kit, but I can't find them sold by themselves. Anyone know where to get these? I don't particularly want to spend sixty bucks on a gasket kit to get four gaskets that probably cost 90 cents collectively. Thanks in advance.
Mark D.

Posted by: mihai914 Aug 21 2006, 04:14 PM

http://www.autohausaz.com/search/productx.aspx?sid=pbsjxtu4hg0yfrndtu5wcqme&partnumber=%20039129707 for example if it's a 2.0, they're not that cheap though.

Pelicanparts must have them, GPR and all the other good vendors.

BTW, the gasgets only come with the spacers I think, you can always make your own, can't be that had.

Posted by: Jake Raby Aug 21 2006, 05:20 PM

I sell them as well.

Posted by: Cloudbuster Aug 21 2006, 05:23 PM

PM me your address and I mail the pair I have sitting on the workbench.

Posted by: URY914 Aug 21 2006, 06:37 PM

In a related topic.....

How about the spacers. I couldn't seem to find them on the usual site after doing a quick search.

Posted by: Jake Raby Aug 21 2006, 06:48 PM

They are not in the store site.. At this time due to quantities they are a custom order. They are 35 bucks for one pair for the intake/head and 45 for the carb/intake set.

Posted by: URY914 Aug 21 2006, 07:31 PM

Jake,
Do the spacers primarily act as thermal insulators to keep head heat from migrating up to the carb?

Paul