Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Anyone using 16" 5 lug fuchs?

Posted by: kenschipper Sep 4 2006, 05:35 PM

Is anyone using 16" five lug Fuchs under standard fenders. What tire size and rim width will usually fit. Photos?

Posted by: Aaron Cox Sep 4 2006, 06:37 PM

195's on 6"


Posted by: smj Sep 4 2006, 06:53 PM

I have 16" Fuchs taken off an '86 Carrera, allegedly 16x6 up front and 16x7 in back. I've got Yokohama AVS ES100's mounted, 205/55ZR16 flavored.

The rear fenders had been rolled a bit, and that wasn't enough to clear the 225s the PO was running there. I haven't had the car back from the shop a week yet, but I'm still seeing some rubbing when braking and turning on the switchbacks up in the Berkeley hills. So, seems we really did need to take the spacers down a bit in front...

I haven't taken the wheels off to verify the sizes, but if the above is correct than the fronts have an offset/ET of 36mm, and the rears of 23mm. Here's a link that lists a lot of info on the factory wheels: http://members.rennlist.com/911pcars/WheelWts.html

Posted by: brownaar Sep 5 2006, 03:45 PM

Bridgestone RE71 205/55ZR16 on 16X6. I'm thinking you have to use an early Fuchs, deeper offset I believe. Mine don't rub the fender, but do rub a little on the inner fenderwell with a really sharp turn-in.

Posted by: Britain Smith Sep 5 2006, 06:05 PM

I am running 16" fuchs on my Turbo 912 project, I got a set of Falkin's in 205/40/16.

-Britain

Posted by: Headrage Sep 5 2006, 06:09 PM

I was running 16 x 6 with 205/55's all around on my /4 with just the rear fenders rolled in. Fit really well.

I would be running them now exept I thought my "new" /6 had a 5 lug conversion until I sent the check... sad.gif

Posted by: Aaron Cox Sep 5 2006, 06:27 PM

ouch allan

Posted by: dgw Sep 5 2006, 06:54 PM

From the other thread on tire pressure, mine has Dunlop D60 (whatever that is) on 7x16's. 205/55/16.

Posted by: carreraguy Sep 5 2006, 10:37 PM

I'm running 6x16 front on 205/55 and 7x16 rear (944 Turbo Fuchs) on 225/50 (all Michelin SO-3's). No problems in the front at all but had to stretch the fenders a little in the rear for clearance. I'm pretty sure I could have even fit the 7's in front with no problem. You can see the left rear "stretch" in this pic.


Attached image(s)
Attached Image

Posted by: brownaar Sep 6 2006, 05:50 AM

Oh yeah, pics.


Attached image(s)
Attached Image

Posted by: brownaar Sep 6 2006, 05:53 AM

front and rear


Attached image(s)
Attached Image Attached Image

Posted by: thesey914 Sep 6 2006, 06:30 AM

My 914 has 7x16 with 205/50/16 all round. Car is slightly more built now.
Rear Camber is not set so rear wheel looks iffy..



Attached image(s)
Attached Image Attached Image

Posted by: Rockaria Sep 6 2006, 07:49 AM

7X205/55 16 With slight rear fender roll on rear. 6s up front.

IPB Image
IPB Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)