I've seen several newbies online lately from Oklahoma, how many do we have running around total?
If I had a running teener I would suggest a state wide get together this fall but right now mine does not even roll.
So if you are from the Sooner state chime in and say howdy.
Howdy! Norman is my home town, but I'm relocated outside of Philadelphia for about 12 years now. I used to hang out at Bob Dumonts' place years ago, and BRI as well. I was envious of the Tallahina drive awhile back, made me home sick.
Kevin
CENTRAL OKC!!! WERD UP!!!...I'm glad I found this thread...I'm 17 and my dad just bought me a $700 914 that runs (father son streetable racecar project...aww)...but it's pretty much a piece of sh1t...my actual car is a 2002 wrx...but this is teh new project which will be prepared for hallett by hopefully the next season...but who knows...right now it's tear down time and fix teh chassis up!...
let's hang out sometime!!! I'll be in teh suby though since the 914 is in shambles
There is at least 9 more if you check the Frapper map of OK
http://www.frappr.com/914club/
You guys make sure and check out the MUSR 8 nailed thread in the Garage. Ft Smith, AR in Oct is a short drive for you guys.
see you there.
JR
YES! Another suby convert in OK! Hopefully you have some good contacts for fine tuning once I get mine on the ground again. The two of you in OKC need to get together and take a cruise up north to Tulsa. I have parts for ayama, and maybe some ideas for Project on his conversion. At least you can see how far along I am, or not...
I missed the last MUSR but if I can catch a ride in a teener with someone this year I'll be there.... oh, that is if it does not fall on the same week/weekend as SEMA in Vegas. Headed down there to check out a couple other Suby conversions and maybe that trick retractable wing.
yeah supermoose from rs25.com is hooking me up with a complete JDM ej20t with wiring harness and ecu for 1650 shipped! w00t!!!...I need to get a welder this weekend and start practicing for te big build...hey did you do the renegade kit? or fab your own?...I am leaning towards renegade to save me trouble haha...I also need to align door panels and the hood and trunk...this car is a junker I mean gosh!...I was going to shim a few things so they fit better but we'll see...also, I got some good universal weatherstripping pieces to save money...all I need now is the front window seal that runs along the top and sides and the ones that go on the triangle windows...becuase there's no way a universal piece will fit...also is there a way you can just repair the old seals with like rubber goo that dries?...mine would still work they are just kinda torn...
I'll be running up to Tulsa for a few hours some weekend in September to visit a friend and work on her computer. Haven't decided yet if I'll take the 914 or something with a radio... It's a long trip to make without some tunes, not that I could hear them on the way there anyways.
Not sure why I'd complain about that, I did pick the car up in LA and drive it through AZ and NM and part of Texas....
I bet gas is lookin pretty cheap up there right about now too!
There are a couple other guys in Owasso that have teeners and Brian at RennSport has a few and runs one at Hallet.
Gas is on the steady decline here, today it dropped below the $2.40 mark! Send me an IM when you are headed up, I need a ride to get motivated to finish mine!
Well, I spend a lot more of my time on the Pelican 911 board, as you might guess from my post count on this board, but I lurk here occasionally to gather information for a car I am working on. I have two 914s; a '71 six, and a '74 four that will end up as a track/autocross car.
JR
does anyone do autobody media blasting in OKC?...come to think of it I don't feel like sanding down the whole car
I flew over OK once, does that count?
damn, I thought you had some media blasting info...haha, it only counts if you have a car here...and can go to meets...unless it doesn't run...like mine hehe
I just joined the forum today, although I've owned my 914 for almost 10 years.
I live just outside Shawnee, OK.
damn that's like 4-5 people...we need to HANG OUTTT!!!
werd...
Hey fellas...
I'm coming to hallet in about a month..
anyone want to come out to hallet and see some vintage racing?
brant
sure, I think I'm going...my suby friend blake runs a classic car (maybe an MG, not sure) there as well as his suby...also a 914 guy with a saab turbo swap named mike also goes...met him last time, I'm thinking about going up if it's on a weekend of if I'm not working on my 914...
I'll be running on 10/7 and 10/8
http://www.corinthianvintagerace.com/
a friend of mine is renting the track with me for 10/6 I think...which is pretty cool...if any of you out of town guys get there in that early evening then I'll chec it out!...I am still not FOR SURE, but it's likely...look for a red/gold suby wrx!
yeah I don't think that's what it is...it's actually Monday 10/9...assuming we have enough people...I hope I see you either way! or just a 914!
well come on out....
and look for the orange car with the race number: "914"
we should be there running and dicing.
brant
Attached image(s)
Howdy Ya'll !! New member to 914club and new owner of a '73 914/4 2.0
Shawn Lively
Enterprise, OK 74462
I just bought my first 1973 914/4 2.0, 1 owner, always garaged, and Documented!
I have been looking for a club in my area that deals with the 914, but with no luck, and I dont want to join the PCA. Looking for more of a HomeGrown club.
If anyone wants to talk shop, feel free to contact me anytime. I only live 30 min. South of Muskogee and 60 min. West of Ft. Smith AR.
Any good Tracks or Courses in this area to take my baby to? Dont like to drive her too much on the highway, (Or at least the way I want to drive her)...
Count me in!
Shawn Lively aka Keebler Kahnn
(918)-391-2458 CELL
(918)-799-5272 HOME after 5:30 pm and Weekends.
http://www.LLFunBuggy.com
I will post some pics tonight, providing my DSL is working... I work for the local Telephone Company and my Internet is sporadic at best...LOL... (I'm just the Mechanic)
Keeb~
wow that's hott...and really nice...tonight I took out my dash pad and it's cracked to shit...speaking of crack...the guy who wired the dash last was ON crack...or something!...I have a meeting with teh bodyshop in a week and a half and I want it torn down pretty much all the way...and then after it's fixed and what not I am getting it beadblasted and sealed ready to get MODDED!!!...time to fab up all my crap and fix the broken stuff with a welder, peace
8th of October? Count me in!! Look forward to meetin' Ya'll !! Just name the place and time ... i'll be there....
(I'll try to get my wife to take the day off work as well)...
PM me a price for that radio and cd Bro... Got me all stirred up now...
Keeb~
werd for the 8th...I will be in my suby though...but you guys will like it hehe...I am going to have it all ready for the 9th at Hallett (if it happens) also, I want a ride in a 914...I've never actually ridden in one haha...because as you can see mine it a total junker...(which I hope to fix)
KAAAAHN!
I was thinking a little trade action. The radio and CD for some tube bending time. And the 8th is on a SUNDAY, do you both work then?
Project,
I'll take a ride in the SUBY. I'm working on a 2.5 conversion and need a reference.
My wife works on the weekends.. I don't. I have Bankers hours 8-5 M-F....
As far as Tube bending.... not a problem. I need to fabricate a Harness bar that can bolt in and unbolt not damaging the car anyway. Do you already have the tube? If not, I have a source close by that carries all sizes and Material grades...
Kahnn~
Keep us posted on what time to be there. It'll be great to see some 914's for a change.
I've sent my registration fee in and talked with the event people.
I haven't actually seen the schedule of events for the day and typically don't receive one until arriving.
but here is how it often looks:
8am-ish drivers meeting
9am-ish start practices
(my group could be anywhere from group 1 through group 7)
10-11am ish would be race 1
and after a lunch break there would be a feature race anywhere from 1pm to 3pm.
so my best guess is to assume that I would run in the morning around 10am
can't wait to meet a bunch of you guys in person.
I have shade, and some spare chairs.
I usually have snacks, soda, and water.
brant
yo, if I go, not only will you get a ride in the car, but I will rip the throttle and pwn some corners for you and tell you a bunch of crap that will maybe help you out!!!
Hey Ya'll
Ya'll need to check out OUR new website... it is FINISHED and Ready to GO!!!
.. I need everyones input on this... All opions accepted ...
Thanks,
Keeb~
http://www.Oklahoma914Club.port5.com
sweet...any swap meets coming up near us?...also, who gets on AIM
IM me at jDturbobooty
now you guys post your names so we can easily contact each other for help
Hi, I'm in the Tulsa area with my roller and my dad also has a roller in the Tulsa area.
A&P girl,
Any chance of meeting up with us on the 8th of Oct to go out to Hallet for the afternoon? AND WELCOME! Thanks for chiming in for your first post!
I have a feeling the teeners will start coming out of the woodwork around here now that we have a local contact venue.
Check this out...
http://www.914world.com/bbs2/index.php?showtopic=60747
Shawn~
http://www.Oklahoma914club.port5.com
For those coming up from OKC it might be easier to meet on the west side of town since we will be heading that direction anyway. Plus, I know of a good scenic road we can take on the way out. There is a Mexicali Border Cafe just off of the highway as you come into Tulsa from OKC. Take the South 49th West Ave exit as the maps show and we can meet in the parking lot to the side of the resturant.
Its about a 45 minute drive from Tulsa and according to Brant things won't get kicking till 10-11 so I suggest meeting from 9 to 9:30am and then head over from there. That would also give a chance for stragelers to catch us. I have maps below and will start another thread for this topic specifically... Sound good?
Meet at Mexicali? At the arrow, easy to get to from I-44 east or south..
Attached image(s)
Circle marks the resturant and the arrow shows where we can park and meet.
Attached image(s)
Sounds good to me.......
you guys are the BOMB!...all teeners and then a WRX!
A&PGirl you have a PM!
My dad and I will probably meet up everyone and drive out to Hallet on the 8th.
Krebs OK
100miles South of Tulsa
word...bumpzors!
I though ya'll might like to see these pics...
... I have scanned some of the documents that came with the Porsche... here is a photo of the Car the day it was brought home from the Dealership, the Original Window Sticker and the Original Bill of Sale...
And if you notice, the Car is originally an Oklahoma car... Sold at
Conine-Swab Porsche / Audi Inc. In Tulsa.. The address is where the new Redline Motorsports Dealership is now (Formerly The Mithubitchi Dealership).... My how things change over the years... LOL
Being an oklahoma car its entire life could explain why there is very LITTLE rust on her...
Later,
Shawn ~
http://Oklahoma914club.port5.com
Very COOL! I have a few documents that came with mine but nothing like an original photo of the day she was born!
Are you going to get to join us Suday?
Hey srthompson01.... if you want to go to Hallett with us, we can meet in the AM at the LOVES Truck stop in Eufaula... We could caravan to Tulsa from there....
Shawn~
does anybody local (OK) know what the weather report for sat/sunday is supposed to be.
I'm trying to pack and hoping to wear shorts.
brant
but also pants or a race suit for racing btw!!!...racing in shorts = not allowed/just plain dumb
also, list of objectives for me!!!
Fix exhaust leak
Top off coolant
Change oil
Install Pads
Install and bleed lines
Detail/vacuum
maybe some other crap
Ok... racing suit will come.
but is it going to rain?
is it cold there?
or will 70's be expected this weekend?
inquiring minds want to know
(and p.s. good luck with your list too!)
brant
no rain. sunny and 85 on sunday
Attached image(s)
good deal then...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)