Printable Version of Topic

Posted by: mikez Sep 12 2006, 02:14 PM

Somehow ended up with a bunch of Porsche Female Metric to -12AN male stepdown fittings from the last sixer conversion.....don't need them ALL....

I also have Female -12AN to male -10AN step down fittings and a buncha straight female -10AN hose ends....

I have a -12AN cooler I'm adding to my /6 that seems to like high temps while just cruising.....so, anybody got a shitload of -12AN hose end fittings? Straights, 90s, mostly females for braided lines.....

Looking to buy, trade, sell.....

Posted by: Aaron Cox Sep 12 2006, 02:17 PM

i got all my AN stuff from a place on ebay that was going out of business..

username - JDAENT (JDA Enterprises)

Posted by: mikez Sep 12 2006, 02:42 PM

Thanks....sent him an email.

Posted by: Britain Smith Sep 12 2006, 03:23 PM

I need fittings.

If I am thinking correctly, then I need two of the metric females to AN-12 Male. I need to route the oil lines on my turbo 912 project from thermostat in the front of the rear passenger side fender up over the rear tire (clearence too close for the stock oil lines) to the engine. These are the right pieces correct? Let me know how much? If you have a picture then that would clear it up for me.

-Britain

Posted by: mikez Sep 12 2006, 03:57 PM

Posted by: Britain Smith Sep 12 2006, 04:12 PM

That would be them. Let me know how much. If the price is right, I might take 6 if you got them. I might need to make custom short lines that go between the hard line and the oil cooler in the front. Do you know if they make this metric fitting that hook directly up to a hose or do you have to use an adapter?

-Britain

Posted by: mikez Sep 12 2006, 04:20 PM

These attach to the oil tank and the engine....then you use -12AN hose ends. You cut your lines install another -12AN then attach the thermostat, then another -12AN to the cooler, with another -12AN, then back to the thermostat.....etc, etc, etc.....

I got them from BAT Inc....will have to see what I paid.

Posted by: mikez Sep 12 2006, 04:31 PM

Geez....I paid $30????

Posted by: Aaron Cox Sep 12 2006, 04:32 PM

QUOTE(mikez @ Sep 12 2006, 03:31 PM)

Posted by: Britain Smith Sep 12 2006, 04:46 PM

$30 each? Ouch? How many they sucker you into getting?

-Britain

Posted by: J P Stein Sep 12 2006, 05:22 PM

My stash of AN is gettin'g kinda small.
30 bucks + shipping for all. The longest length of AN12 is 4 feet.
The small stuff is AN6.
Z gets first dibbs.


Attached thumbnail(s)

Posted by: mikez Sep 12 2006, 06:06 PM

I'll take it JP.....
email me at 356@cox.net

Britain...I have five I am willing to sell.

Posted by: Britain Smith Sep 12 2006, 06:45 PM

Dammit JP, I need some AN-12 shit...oh well.

Hey Z, how much for two? Remember the great deal you got on the stuff from JP when you decide a price...

-Britain

Posted by: mikez Sep 12 2006, 07:34 PM

I have a guy on Pelican that has some -12AN stuff for sale....

Posted by: mikez Sep 12 2006, 07:40 PM

BTW....if you can live with -10...I have a lot that as well....I used that on my small bore sixes.

Posted by: Aaron Cox Sep 12 2006, 07:42 PM

QUOTE(mikez @ Sep 12 2006, 06:40 PM)