Posted by: jim_hoyland Sep 23 2006, 04:49 PM
Found a replacement for ye old drain hose at Osh hardware Store. They sell 20' lengths of irrigation hose for $25.
The existing hoses seemed a little short. They went through the tin ok but exited above the heat exchanger. In any case I cut them on the long side so they will drain near the bottom of the rocker panel.
Here's some pics of what the hose looks like........
Attached image(s)
Posted by: pfierb Sep 23 2006, 05:29 PM
Fun putting those clamps on!!!!!
Posted by: JPB Sep 23 2006, 06:19 PM
Thanks for the hose idea, seems to work great!!
Posted by: jim_hoyland Sep 23 2006, 06:30 PM
Didn't have the right tool to control those%*$@& clamps; went with NARP hose clamps.
Posted by: Headrage Sep 23 2006, 06:38 PM
QUOTE(jim_hoyland @ Sep 23 2006, 05:30 PM)
Didn't have the right tool to control those%*$@& clamps; went with NARP hose clamps.
Just find an old pair of pliers and take a rat tail file to them. Make a nice little groove down the center of the jaws and it'll hold it well.
Posted by: jim_hoyland Sep 23 2006, 06:40 PM
Like lengthwise ? Or across the jaws ?
QUOTE(Headrage @ Sep 23 2006, 05:38 PM)
QUOTE(jim_hoyland @ Sep 23 2006, 05:30 PM)
Didn't have the right tool to control those%*$@& clamps; went with NARP hose clamps.
Just find an old pair of pliers and take a rat tail file to them. Make a nice little groove down the center of the jaws and it'll hold it well.
Posted by: Headrage Sep 23 2006, 06:42 PM
QUOTE(jim_hoyland @ Sep 23 2006, 05:40 PM)
Like lengthwise ? Or across the jaws ?
[
Lengthwise worked for me.