Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ How wide does a trailer have to be to tote a 914?

Posted by: Pnambic Oct 7 2006, 11:13 AM

Just as the topic says, I need to know the outside width of the car. Anyone have that dimension handy? Our own 914 Info - Body Dimensions page has all kinds of diagonal measurments, but not the one I need. I just need to make sure it will fit between the wheels of a trailer I'm borrowing....if I think it will fit. The trailer is normally used to move a Bobcat, but I haven't seen it yet.

Pelican has the width listed as 65". Is the width less than that lower on the car and if so, by how much? Or should I just go with the 65?

Thanks a bunch in advance!

Posted by: So.Cal.914 Oct 7 2006, 11:46 AM

Stick with the 65", I think when I measured I came up with 63" but I call it 6'-0"

for clearance.

Posted by: Pnambic Oct 7 2006, 12:15 PM

QUOTE(So.Cal.914 @ Oct 7 2006, 01:46 PM)

Stick with the 65", I think when I measured I came up with 63" but I call it 6'-0"

for clearance.

Thanks Paul!

Posted by: cantley914 Oct 7 2006, 12:43 PM

QUOTE(So.Cal.914 @ Oct 7 2006, 09:46 AM)

Stick with the 65", I think when I measured I came up with 63" but I call it 6'-0"

for clearance.

Steph