Got the trigger points from Britt tonight when I came home from work.
Pulled the distributor. MAJOR problems. Dist is shit.
You name it, it has it. Excessive shaft play. Braided advance plate wire was ( yes I said was) barely hanging on. It broke at the slightest wiggle. Trigger points look questionable (Britt sent me two sets that look better). Advance pot loose as shit. You name it.
Sorry Guys... I am sooo bummed... beyond belief. I was looking forward to a couple of days away from work etc.
I'm just pissed right now that I did not pull this earlier and order one. I thought about it a few weeks ago when trying to diagnose the running rich condition but kept running in other directions.
I think I will go drown my sorrows now.
I'm sure somebody could overnight a dizzy to you...
Whoa.. you dont have a hair on your ass if you dont fix that car RIGHT NOW and get to the event
Somebody CLOSE by has to have a dizzy. I can ship one tomorrow if need be "complete".. just drop it in and hook it up.
B
I'm looking... only shop in town that *might* have one is closed... I'll have to check with them in the AM. They might even be able to overnight one.
If I was sure that was the only problem I would be more agressive about it... but I'm not.
I have replaced tons of stuff just to get to this piont... a 6 hour drive with an un-proven car is making my wife more than a little nervous. She is giving me the stare when I was talking about having a dizzy overnighted and pulling a one day test on it.
I'm going to sleep on it tonight. worse comes to worse I get up at the crack of dawn Sat and drive down
We'll see.
I'm sure I missed the other 300 posts about what it "was" doing wrong.. but give me a brief description!
You know me.. assemble a new engine 3 days prior to a 1700mile road trip. I'm not scared.
B
Well simply put fouling plugs to beyond belief condition in less than 12 miles
Here are things I have replaced or are known good... recently posted on another thread which is how we got to the process of replacing the TP's.
New fuel filter and pump (after market MSD set at 29 psi).
MPS - rebuilt by Geoff - tested- holds vaccum.
Pertonrix ignition
Rebuilt fuel injectors - tested by witchhunter (thisis when the rich problem went from bad to worse)
All new vaccum hoses EVERYWHERE!
New fuel lines throughout.
Tested AAR.
New CHT.
T2 operating within range.
Cold start valve unpluged and isolated from fuel system.
Valves adjusted before reinstalling engine per the Capn't method.
I'm sure I am missing somethings that I have done. The only thing I have not done yet was a compression test... but I am pretty sure that would not foul all four plugs in 12 miles.
Take a new dizzy if offered and try it. If it still runs like shit then drive something else. Just show up and have fun. Hell I'll let you drive my car when you get there(if mine makes it).
Hi Todd
2.0 right? I have a spare I can LOAN you. I will need it back sometime. PM me an address and I will ship it tomorrow. You will get it Thursday. We can worry about the details in Columbus.
thats why you are in good company and friends in this not a "CLUB" oh and grow some HAIR!!!!
I have a complete 1.7 FI engine from a 72 that I parted a while back. The dizzy should be good. I also have most of the FI stuff from a 2.0 from a 74, no dizzy on this one, but I think that I have a dizzy from another 2.0 motor. I also have a 009 in great condition but I don't know if the 009 can be used with FI. Everything that I have had running has been carbed. I have a small stockpile of parts "just in case". Let me know what you need. If I've got it, it can be in your hands overnight.
Todd, since you have all these offers for parts and no longer have the need for the please overnight whatever is left to ME. You are going to make that trip.I can feel it!
Check your local FLAPS I have been able to get one from Auto Zone and even included triggerpoints
grow some balls and borrow a dizzy LOL
I have a dizzy that is missing a TP.
I have another one that is going out, i'm rebuilding it right now.
you pay shipping, (2-day or overnight) and its free...
Is the resistor in place with the head temp sensor?
Can you take a picture of the engine for me?? I would like to look over it.
B
Brad...will do. As soon as I get home after work.
Britt - Doug - all. Car is a 1.7. My local guy should be open in a few minutes I will see if he has one.
If not parts america (advanced auto parts here) has a rebuilt that I can get overnight.
Still gonna give it hell guys. If I can get it in Thursday night and give it good test I think I can make the wifey comfortable with the travel.
Feeling more positive this morning.
Oh and the ... I drank it all
OK made the call to the local guy... no dice. He said it would take him a couple of days to source a rebuilt one.
Soooo... I just ordered one from PA. Should be here tomorrow afternoon. I hope it isn't a piece of crap.
Wish me luck boys... it's gonna come down to the wire.
I'm sure the one from PA will be fine. It is a rebuilt bosch.
AT this point the only thing I am worried about is that this IS the problem.
Don't know... I have been chasing this thing for so long now... it seems everytime I change a part with a new part the problem just gets worse (ie. new fuel injectors).
Just gonna keep my fingers crossed that this works.
-why was this locked?-
Probably cause Z was jealous of your manly mane flying in the breeze in you fine black car.
Any update Todd?
Yeah whats your excuse for not going to the FFC now?
You could have had my dizzy. I bought it last year for my 2.0L engine, it just needed Trigger Points.
b
this breaking news....dat.datdat..dat.
Wifey just called... Fed Ex just dropped off parts. New Dizzy and some fresh plugs.
Gonna pull a late night fixin session tonight.
I have clients in town who I have to take out to dinner tonight... should be done about 8 or 9... then off to the garage.
Keep 'em crossed boys. If it seems OK after I put in the new dizzy, time it, et all. I will drive it to work tomorrow and give it a shake down.
I am thinking I should be able to tell a difference right away if this is going to cure it... but not sure. A drive tonight then pull the plugs and inspect and to work tomorrow... then pull the plugs and I should be able to tell if it is working properly.
I gunning for it guys. If I gonna go for it I won't be leaving until Sat morning at 5AM. Should put me there about 10-11 AM.
I'll update you in the AM.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)