What are the two ports in the 2.0 heads just outboard of the top intake studs on each side? I have a dual carbed car and there are two plugged threaded stud/relief pieces currently installed into each of these points.
They are air injection ports. That hole goes directly into the exhaust port for air to be injected into the exhaust stream via the smog pump.
These engine runs a bit rich. Injecting air (and the oxygen in it) causes the hydrocarbons to keep burning even as they are flung down the exhaust pipe.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)