Posted by: JThw8 Nov 12 2006, 08:55 PM
Soo, Im dissasembling my 914 for final prep stages before paint and the rear bumper has a small (1 inch or so) hole on cut in it on the drivers side. With the bumper off, behind this is some sort of fixture small round tube with bracing.
It all looks original and Im just trying to figure out what the heck its all for. There is nothing matching on the passenger side.
Probably something simple but I just dont know and Im trying to figure it all out
Posted by: SirAndy Nov 12 2006, 09:03 PM
QUOTE(JThw8 @ Nov 12 2006, 06:55 PM)
Soo, Im dissasembling my 914 for final prep stages before paint and the rear bumper has a small (1 inch or so) hole on cut in it on the drivers side. With the bumper off, behind this is some sort of fixture small round tube with bracing.
It all looks original and Im just trying to figure out what the heck its all for. There is nothing matching on the passenger side.
Probably something simple but I just dont know and Im trying to figure it all out
tow hook mounting point ...
your original tool kit had an oval shaped tow hook that screwed in there so you could tow someone behind 'ya ...
Andy
Posted by: JThw8 Nov 12 2006, 09:19 PM
QUOTE(SirAndy @ Nov 12 2006, 10:03 PM)
tow hook mounting point ...
your original tool kit had an oval shaped tow hook that screwed in there so you could tow someone behind 'ya ...
Andy
ahh, bueno, thank you, I knew it was probably something simple but it was driving me nuts