All,
There's a circular elastomeric gasket/seal around the outer portion of the door lock tumbler that pretty much disintegrated when I dis-assembled my door handles. I would like to find a replacement, but frankly don't know where to start looking. I replaced the door latch cam, which I purchased from Pellican, but they said the seal is NLA. I would prefer to not leave it out. Any suggestions would be greatly appreciated.
Thanks,
Andy
I know exactly the seal that you're taking about. I wasn't able to find any when I searched a couple of years ago.
I used a piece of shrink-tubing in place of it... seemed to work out okay.
-Rusty
Wrap several layers of scotch tape (the shiny kind) or some shrink tubing
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)