Printable Version of Topic

Posted by: Orange914x2 Nov 19 2006, 12:13 AM

i have a 73 2L that was recently rebuilt and i almost let it run out of gas last week and it hasent been happy since. i've run a tank and a half through it since and i have been adding a fuel cleaner to try and fix the problem.

what happens is the engine starts to decelerate on it's own asif it isent getting fuel. if i put my foot down it sometimes recovers but i usually have to pull off the road. and oddly it only happens randomly and usually starts up after a couple trys.

Posted by: KELTY360 Nov 19 2006, 12:17 AM

Check your fuel filter. Might have picked up some sediment from the tank.

Posted by: Orange914x2 Nov 19 2006, 12:28 AM

i thought about that, i think my filter might be under my battery somewhere but i havent ever messed with my fuel system. if i do manage to get the filter out and crack it open, what do i use to clean it? can i just pick out the junk manualy? i dont want to mess it up. and if i manage to clean it correctly do i need to do any fancy priming or do i just filp on the the fuel pump for a bit and then try to start?

Posted by: KELTY360 Nov 19 2006, 12:59 AM

You'll probably just want to replace the filter if it is fouled, although you may be able to blow out some of the debris. If you're still fuel injected you might want to turn the key a couple of times (without cranking) to prime the system.

Posted by: Orange914x2 Nov 19 2006, 01:13 AM

really, bummer! i'd have to order a new one. i'd rather try to fix what i got or get some cheap replacement from kregan to use untill i get the original. is it a big deal?

oh- i'm carburated by the way, i have webers.

Posted by: bd1308 Nov 19 2006, 02:55 AM

well maybe you might have clogged your idle jets too?

i hear weber idle jets have a habit of clogging the jets.