Printable Version of Topic

Posted by: PRS914-6 Nov 24 2006, 07:05 PM

I'm looking for some measurements. Basically, if you have a Momo or similar, I could use the following:

1. Overall depth from the face of the wheel to the end of the adapter, preferably to where it seats on the C-clip. This can easily be measured by setting the wheel face down on a table and using a tape measure through the center. If on the car, you can use a straight edge across the face and measure to the end of the adapter

2. Depth of the wheel from the face to where it mounts to the adapter (hub)

Thanks....