Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 930 TRANY anoyone?

Posted by: JPB Nov 25 2006, 06:40 PM

Not mine but this might be a good start for one of you fellas. biggrin.gif

http://cgi.ebay.com/ebaymotors/Porsche-930-Turbo-RACING-Transmission- regeared_W0QQcmdZViewItemQQcategoryZ33733QQihZ018QQitemZ280052600900QQrdZ1QQsspa
genameZWDVW

Posted by: Mueller Nov 25 2006, 08:47 PM

too bad it'll cost another couple of grand to flip the R&P.....

of course if one was to build a V8 911, it would be nice as is idea.gif biggrin.gif

Posted by: Brett W Nov 26 2006, 12:20 AM

Flip the whole tranny. Don't bother with the ring and pinion. If you have aV8 it will get the engine down a lot lower in the chassis. This is one of the issues I am having right now with my race car.

With the axles level the tranny has to sit at about 9 inches off the ground. That puts my engine way up in the air. If I could flip the tranny upside down I would gain several inches.

Posted by: Andyrew Nov 26 2006, 02:34 AM

would be a terrible v8 trani...

the gearing is ALLL wrong. 145 top speed at 7200rpms? thats worse than the 901!!!

Posted by: wbergtho Nov 26 2006, 02:51 AM

QUOTE
would be a terrible v8 trani...

the gearing is ALLL wrong. 145 top speed at 7200rpms? thats worse than the 901!!!


If it was stock gears...you'd be styling!

Posted by: JPB Nov 26 2006, 06:35 AM

Strap on a Suby 2.5 STI ballanced for 10K RPMS and 500+ ponies and ya might have something there. biggrin.gif

Posted by: Andyrew Nov 26 2006, 12:55 PM

QUOTE(wbergtho @ Nov 26 2006, 12:51 AM) *

QUOTE
would be a terrible v8 trani...

the gearing is ALLL wrong. 145 top speed at 7200rpms? thats worse than the 901!!!


If it was stock gears...you'd be styling!


Yup... but this one is a "race" trani... close ratio, low top speed for a track.

3krpm's at 60mph, 4k at 80mph..

Posted by: Mike T Nov 27 2006, 06:30 AM

Looks like a good a good autocross tranny for my V8 car. But $4900? Yikes!


Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)