Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Help ...CV joints vw 0 vs vw1

Posted by: CHAFF Nov 25 2006, 08:33 PM

Howdy all,

I thought that the outer and the inner were identical...BUT if someone has a set of axles out....can you check which joint (VW0 or VW1) goes to the tranny side or the wheel side?

Thx
-L

Attached thumbnail(s)

Posted by: Mueller Nov 25 2006, 08:43 PM

there is no differance between the inner and outer CV joint...the different markings you see are more than likely just for manufacturing id

Posted by: CHAFF Nov 25 2006, 08:45 PM

Thanks man, I thought so cause they're physically identical.

Cheers

-L

QUOTE(Mueller @ Nov 25 2006, 06:43 PM)

there is no differance between the inner and outer CV joint...the different markings you see are more than likely just for manufacturing id

Posted by: Mueller Nov 25 2006, 08:48 PM

QUOTE(CHAFF @ Nov 25 2006, 06:45 PM)

Thanks man, I thought so cause they're physically identical.

Cheers

-L

QUOTE(Mueller @ Nov 25 2006, 06:43 PM)

there is no differance between the inner and outer CV joint...the different markings you see are more than likely just for manufacturing id

manufacturing tolerances.....