Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ HPMX carbs

Posted by: fall-apart-dave Nov 26 2006, 08:32 AM

Alreet!

Does anyone know if HPMX carbs have ports for a vacuum advance dizzy? If not, can someone point me in the right direction.... Port my existing manifolds, or get a bosch 009 dizzy and maybe an electronic ignition?

Cheers

Dave

Posted by: Joe Sharp Nov 26 2006, 08:36 AM

The beest dizzy we found for cheep is the 050.
:PERMAGRIN: Joe

Posted by: SGB Nov 26 2006, 08:51 AM

The stock diz with ports blocked will work also, but not quite as well as others. 009s are poorly made these days, and the curve on the 050 is better too.

Posted by: Chogokin Nov 26 2006, 12:57 PM

I have the HPMX carbs, and they do have the vac ports on them, I am running a dual advance SVDA from aircooled.net, works pretty good for me. The only real problem I have with the HPMX is proper jetting, one of these days when I have time (and money biggrin.gif ) I will get our local expert over here to help me out with that.

Posted by: fall-apart-dave Nov 26 2006, 04:27 PM

QUOTE(Chogokin @ Nov 26 2006, 10:57 AM) *

I have the HPMX carbs, and they do have the vac ports on them, I am running a dual advance SVDA from aircooled.net, works pretty good for me. The only real problem I have with the HPMX is proper jetting, one of these days when I have time (and money biggrin.gif ) I will get our local expert over here to help me out with that.



Where abouts are the ports? I can't see them, but then I've never used vacuum advance ports before either! What size pipe do I need? And I'm guessing a T-piece is needed too, right?

I have 44's, and a 1.7 (but I am planning a bigger lump hence bigger carbs!)

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)