Printable Version of Topic

Posted by: andys Jan 2 2007, 11:15 AM

Spent some time during the Holiday week (when not shopping for the family) and machined some CV adapters. These adapt late 911 axles/CV's to my 01E 6 speed trans drive flanges.

Andys


Attached image(s)

Posted by: andys Jan 2 2007, 11:17 AM

Another in-process shot

Andys


Attached image(s)

Posted by: michel richard Jan 2 2007, 11:19 AM

Very slick.

They're steel, right ? Can you post dimensions ?

Posted by: jd74914 Jan 2 2007, 11:26 AM

Very nice. I wish I had a lathe.

Whats the width (I'm assuming you needed to cut them as spacers too)?

Posted by: Aaron Cox Jan 2 2007, 11:43 AM

nice work dude!

Posted by: andys Jan 2 2007, 12:10 PM

Yes, steel. I made some drawing changes on-the-fly, so some updates are required. Unless you have a 6 speed Audi/Getrag and late 911 axles, the dimensions are of little use as these are made for a completely custom setup.

The thickness was dictated by the space available resulting from some custom made trailing arms that moved the hub/bearing outboard by 1.20". Mounting face to mounting face distance is 1.125".

Andys

Posted by: rick 918-S Jan 2 2007, 01:15 PM

That exceeds the cool factor scale!

Posted by: Dr. Roger Jan 2 2007, 01:48 PM

Audi 6 speed????

That is off the ding-dong-dittily HOOK!


Very nice work.

Posted by: McMark Jan 2 2007, 03:21 PM

So beautiful.