Printable Version of Topic

Posted by: burton73 Jan 31 2007, 01:45 PM

There is a set of 6s and 8s 16's Fuchs on Ebay That need to be re chromed. I am not worried because I have done this before but I need to make sure that the wheel size is right. And the number for the 8s are right. The guy is 15 minuets from me to pick them up and Al Read can refinish them for me. I have a set of 7s so this would work out and I can refinish and sell the par of 6s. I need to know if the part number is right on the 8s. This is what the guy’s ad says.

Thanks,

Bob

On Jan-30-07 at 19:53:16 PST, seller added the following information:
model # 911 362 117rear / 911 362 113front
IN A BOX NEXT TO MODEL NUMBER IS 17 FOR REAR AND 13 FOR FRONT. I'VE BEEN TOLD IS THE OFFSET. BELOW THE MODEL # is >>AS1062 ON BOTH FRONT AND REAR.
FRONT IS 6J X 16 REAR IS 8J X 16
different parts of the wheels are stamped FCO AND THE #'s 286 & 4787
Bolt patterns are 5x130mm Bolt Pattern
wheels are off of 1989 911 25th year aniverssay edition.
i've been told the rear's have more deep dish than normal j8 x 16's
all 4 tires are pirelli

Posted by: elmonte Jan 31 2007, 04:03 PM

This should help

http://members.rennlist.org/911pcars/WheelWts.html

Posted by: burton73 Jan 31 2007, 05:12 PM

QUOTE(elmonte @ Jan 31 2007, 02:03 PM)