Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Steering shaft problems

Posted by: Joe Ricard Feb 12 2007, 10:57 AM

I need new U-joints. But not looking for stock ones. I was in the JEG's catalog and was looking at those. smaller in Dia. and maybe more durable.
I have used up all the spare joints from parts cars and I am not totally happy with the results. most of the old joints begin to loosen up in one of the axis after a big of driving on 11" wide slicks.

So who has been there done that.

Posted by: 904svo Feb 12 2007, 11:26 AM

If you have access to a machine shop you could use these u-joints

http://www.offroad-engineering.com/steering.html

These are what I used on my kit 904.