Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ It's alive!

Posted by: 1bad914 Feb 27 2007, 02:48 PM

Started the new motor this afternoon, initially it would not start, but a little investigation found a loose wire, quick repair and vroom!! Broke in the new cam, timed it and did a little adjusting to the dual dell's. I still have to tinker more with the carbs, but I got it to settle down and idle at about 1100 rpm. I may have a vac leak on one bank, it keeps back firing thru the exhaust when idling down from a high rpm run. To much salt and snow on the road to test drive it, that will wait for nicer weather. The motor is a 1911 with a RAT 9030 cam. Very basic motor meant for daily driving this summer. I'll build a bigger and meaner motor next winter, plus add 5 lug and steel flares!

Attached image(s)

Posted by: StratPlayer Feb 27 2007, 02:50 PM

Congrats, all your hard work will finally start to pay off.

Posted by: SGB Feb 27 2007, 03:12 PM

"Eyegor, bring the brain!"

Attached image(s)

Posted by: 1bad914 Feb 27 2007, 03:42 PM

You got it! I love that movie!!

Nice knockers...why thank you!