Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ where does the starter wire and back up light switch wire exit the eng

Posted by: buck toenges Mar 4 2007, 07:39 AM

Where does the wiring harness that has the yellow wire for the starter and the two white wires that hook into the tranny for the back up lights exit the engine compartment? I have a hole on the driver side on the verticle backing plate of the engine tin but it backs into sheet metal. The wiring harness has a about 1" rubber grommet.
Man I might get this thing ready to turn over today if you guys keep on giving me answers!
Thanks,
Buck

Posted by: vsg914 Mar 4 2007, 08:06 AM

There are a few holes in the rear sheetmetal(vertical) piece, drivers side. stick it through one of those. Sorry, no pics.

Curt

Posted by: 2-OH! Mar 4 2007, 09:25 AM

Yep, use one of the existing openings in the tin on the drivers side, but be sure to use a good grommet to prevent the wire from rubbing on the tin and eventually wearing through...It won't take long with the engine vibration...

2-OH!