Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Removing the seats
Posted by: ahdoman Mar 6 2007, 08:37 AM
I did an extensive search but this didn't come up...how do I remove the seats?
Posted by: sj914 Mar 6 2007, 08:46 AM
Move the seat forward and you'll see four bolts at the rear of the track. Unbolt those bolts and the seat will tilt forward and out.
You can also release the seats from the track without unbolting. When you slide the seat forward, look under the rail that doesn't have the adjuster and there's a stop you can press on and slide it all the way off.
Posted by: George H. Mar 6 2007, 09:50 AM
or 
works to 
Posted by: sj914 Mar 6 2007, 10:06 AM
or
works to Thats exactly what I had to do on the passenger seat. Destroyed the whole thing seat and all. Some how coins were lodged in between the tracks and couldn't get them out no matter what I did. So out came the cutoff tools and some medievel butchering of the seat.
Posted by: dr914@autoatlanta.com Mar 6 2007, 10:22 AM
The "tech tips 700" says to slide the seat all of the way forward until is stops. then reach under the outboard bolster and feel for the tension spring clip under the track and lift up on it (you will have to slide the seat back just a bit) then while holding up the tension clip and the loop slide the seat completely out of the car. No need to unbolt anything!!!!!
Posted by: Aaron Cox Mar 6 2007, 10:47 AM
The "tech tips 700" says to slide the seat all of the way forward until is stops. then reach under the outboard bolster and feel for the tension spring clip under the track and lift up on it (you will have to slide the seat back just a bit) then while holding up the tension clip and the loop slide the seat completely out of the car. No need to unbolt anything!!!!!
thats how i do them...
Posted by: tdgray Mar 6 2007, 12:00 PM
The "tech tips 700" says to slide the seat all of the way forward until is stops. then reach under the outboard bolster and feel for the tension spring clip under the track and lift up on it (you will have to slide the seat back just a bit) then while holding up the tension clip and the loop slide the seat completely out of the car. No need to unbolt anything!!!!!
thats how i do them...
That's because your special AA
Posted by: Lawrence Mar 8 2007, 04:03 AM
That seems to be the method I use, too. But I've noticed that after many years, those seat tracks are pretty gummed up.
I have a big waxy stick (like zipper lubricant) that I use after I clean up the tracks. It makes everything slide nicely, and isn't as messy as grease.
Posted by: markb Mar 8 2007, 08:37 AM
Something like door ease?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)