Printable Version of Topic

Posted by: 1bad914 Mar 7 2007, 07:27 PM

I'm looking for some pictures of L-jet components as they are attached to the motor, for example how is the breather box attached, what type of hose goes between the box and the throttle body. I don't have a car for a reference. I'm installing FI on a carbed car. Any pics would help.

Posted by: ClayPerrine Mar 7 2007, 07:41 PM

QUOTE(1bad914 @ Mar 7 2007, 07:27 PM)

Posted by: MrKona Mar 7 2007, 09:17 PM

QUOTE(1bad914 @ Mar 7 2007, 05:27 PM)

Posted by: 1bad914 Mar 8 2007, 05:42 AM

Thanks for the pics, it will help a bunch, the only other question is what does the breather box attach to, it seems to hang out over the left bank, is there a bracket, any pics of one of those. I am putting all this together from a pile of FI parts, there are D-jet and L-jet stuff together, not sure what the bracket for the box looks like.

Posted by: type47 Mar 8 2007, 08:33 AM

there is a support bracket for the air cleaner housing for L-jet. the bracket attaches to the bodywork behind (going in a front-rear direction) the relay board. in the bottom of the air cleaner (where the filter is/would be), there is a hole for a wing nut to screw into the the mount to secure the cleaner housing.

Posted by: 1bad914 Mar 8 2007, 08:41 PM

Anyone have a picture of this bracket, I don't have one, if I can't find one I will have to fab it.