possible work party at my place in corona.
on the agenda is motor top end disassembly, cleanup, tin repaint etc... pull heads/lap/rering etc....
install racer chris fuel line
install 911 e brake drums in rear. install new rear bearings.
etc....
beadblast and por20 header and muffler....
i have tools. bring yourself, i bring pizza or burgers
not a whole lot to do.. but enough that i thought i would share the workload with my friends LOL
I might be in Indio that day....
Dunno yet. If not.. I B at your house.
Whos gunna hone do your barrels?
And are you gunna use Deeves rings?
You have a valve spring compressor?
And for your information:
"Cheese head screws" isn't the same as having sex with a girl from Wisconsin.
Da Twystd1
spring compressor - check. (brando - bring it back por favor)
rings and hone... depends on who/what you recommend (john or rimco?)
staying 94 dude. im bleeding money at the moment... but i want to up the c/r by lowering deckheight and or decking the head a tad....
cheeseheads. i am probably going to go stainless metric socket head cap screws dontcha know!
Yeah - likely I can help. Keep the simple jobs like drinking coffee or supervising for me.
also need to do some welding.....
front trunk louvered panel courtesy of spunone, needs to be welded in...
have the grinder, anyone got a welder?
local homies check in: bill/craig/paul etc?
pics of louvered panel please.
C
from pauls thread
Aaron, I hope you're supplying green beer for this event!
UUUhhhh...
Howd jew doo that????
C
Aaron,
How do you feel about some looky-loos? Wanna meet the boys and learn some wrenching.
Kev
I'm in!
I can do the fuel line at least.
Is this going to be at your house or mine (either works for me)?
Also, on a related note. I think we should take the engine/tranny down to the car wash one night this week.
Lets see....
Aaron + Grimstead + dirty tranny = happyness?
Just thinking out loud fellas.....
C
I still want to come and give you a hand. I'll be out that weekend. I'll PM you
for info. See ya then.
all are welcome, not a ton to do... but stuff to do regardless.
another task, swap shift console/selector from spare tranny onto shortgeared box. as it was damaged in transit.
I'll be there with plenty of advice.
Cheers, Elliot
I'll get your stuff back to ya this week bro I have your valve lapping tool, not the spring compressor tool; but I'll look for it regardless (I've been wrong before). Wish I could lend a hand but I'll be in beverly hills all day that saturday. I should be able to just stop by on my way.
What time Aaron?
Damn really want to be there but I have to help my brother paint his house
If I can get away anytime in the afternoon I'll swing by. Let me know if you need
anything.
Next Satty is
ST. PATRICK DAY!
I'll toast to you'all as I enjoy my Gunniess
(Watching the parade from downtown Denver.)
Then some bar hopping!
Ok Aaron if ya need the welder let me know your pretty close and I can drop it by but sorry I'm not burning any holes in anybodys car but mine so your on your own welding it in and if ya have some beer I'll watch them weld LOL let me know
thinking 10 AM.... ill start working on her....
address to my folks house.
3319 deaver dr
corona ca 92882
Ya do have air for the cuttin tools right just checkin
i got electric grinders... no air.
i got a few cut off wheels still
No need to bring a body saw and cut off tool then maybe a chisel and hammer LOL anything else ya need let me know
pre day bump.
you should paint/detail the engine compartment while the powerplant is out. where did you purchase that spring comp fixture?
k
most vw shops can get it.
engine bay is already a nice rattle can black
Total Est. Time: 29 hours, 52 minutes
Total Est. Distance: 2078.96 miles
Might be a little late...
i have all week off....
LOL
i dont know if my 914 would make it THAT far....yet
I'm looking at about 10:30 tree trimmers should be done by then can't let the dog play with them ya know
Aaron you still doing this RIGHT?????
yup. i kinda need a head count.
not a whole lot to do tomorrow. cant take the valves outta the heads till monday when brandon's shop is back open, and he can get my head tool.
so welding in the floor piece
taking the heads off the motor, cleanup, look for any signs that they need to be machined (guides/seats/cracks)
running a center tunnel fuel line...
pulling short geared tranny apart to replace shift console that broke (yanking it off my backup tranny), and trouble shooting the giant speedo drive leak.
might start on the 911 ebrake stuff.... but i need a way to put my hubs in. anyone got an all thread setup to pull the bearings in (the fags are in the freezer already)?
threaded rod etc to pull in new rear bearings.....
see here:
http://www.914world.com/bbs2/index.php?showtopic=12197&st=0
if we can come up with that, we can do rear bearings also.....
Aaron i have rod 1\2", 5/8, or 3/4". but
I have the all thread and everything you need to do rear wheel bearings, but the problem is they are here at my house.
george, if you could bring that althread and nuts, im sure i got a socket that could fit it (thats what that is)
or if anyone is passing by sklinezors casa, if they could nab that.
Twystd?
we'll make it work.
i just picked up the motor from storage (aka bills house)
looks like we are gonna have some fun tomorrow.....
I supply da pizza....and a cooler and ice to put your liquids in.
bring a chair to sit on, and some beverages
Put your bearings in the freezer NOW... or have some dry ice ready and they will fall in....
C
they have been freezing for 2-3 days now......
had to tell mom they werent edible....
will do, i will be by between 10 and 11
see ya then boss.
AA
Gonna go for a jog with the dog & I'll see you in a hour!
HUGE thanks to all you guys who came out and spent some time.
Paul, Paul, George, John, Bill, elyut, joe
lots was done. heads off the motor. broken head hgasket found.... those aint goin back in!
little carbon build up, some pushrod tube leaks etc... will all be squared away.
trans got a new shift console and shift console seal....
trunk got a louvered exit.....
did not get to the rear hubs......
started cleaning up ther heads to look for cracks......
AA
No Prob A- ron had a good time Ya gotta love the 914 Group Love the banter between us all. Thanks again Paul
Elliot - 'whats wrong with this kid?'
Dad - 'How much time you got?'
love this crowd LOL
craig is coming by tomorrow to clean up the heads with me... pics tomorrow (bill took some today)
I had a good time, it was great to meet you all in person, and thanks for the stick
time with the mig.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)