In the upper area where the 914 info button is currently, inside there is a place for technical articles.
Can you please add links to both PAnders DJet site, and the LJet site (I cant remember or find it)
That way its always there for others to find/use.
Rich
good idea.
k
To make this easy, just cut and paste...
LJet
http://manuals.type4.org/ljet/
Djet
http://members.rennlist.com/pbanders/djetparts.htm
Rich
Can we do this?
I had to go find this post to find the link...
It would be alot easier...
Rich
Is this a bad idea?
Could you PM me to let me know that you have seen this?
Rich
NP, I didnt want to make this a big deal, nor create a large project idea that becomes a difficult thing to achieve without loads of time invested.
I was hoping to make this minor suggestion to make a small little simple change to the site to make it a bit more user centric.
So, if you can peel this idea out of the larger discussion, it becomes just a link, and should not be confused with a project that will create alot of extra work for you guys who are volunteering.
Thanks for replying...I felt unloved and igonored...
LOL
Rich
I understand on all counts. There is a new thread in the admin area and we will continue to discuss the issue both there and here in the garage.
Update Rich. Working on the Technical Articles section specifically. But I'm also going to pursue with the admin team a place to put links to member's or other sites that are of particular interest to 914world members (like Brad Anders site).
Done...
http://www.914world.com/specs/914info.php
Could we please encourage anyone who is familiar with html to help write some tech articles? Or... if you're not an html expert, could you help capture some of the data from some of the classic threads you'd like to see up there? Drop it, properly formatted, into a Word doc. and we can find someone to convert it. We have an html template if you'd like to give it a shot. I did it... so can you.
Request for volunteers.
Please?
In the next week or so, here is what I am planning to do.
If this fits, I will document it.
Remove and replace front end.
So,
Bearings R/R adjust
Ball joints R/R
Tie Rods---> turbo tie rods
Steering Rack bump steering kit
Front A-arm plastic bushings--->bearings
I will document this last one, just for a few of us who have been trying
Adding a pillow block and bearing setup to stop the anti-sway bar from hitting the gas tank.
And on Rockets car...Closed door paint job. Cheap and fast. 2 days.
Rich
Word docs are a pita to convert. I would prefer simple text. You don't have to be an expert in html to use it given the simple layout we have for tech docs as Mark posted in the other thread.
Simple text in this layout would be AWESOME! And pics 800x600 or less in size.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)